Public Beta
Public Beta
| Manufacturer | Mitsubishi Engineering Plastics Corporation |
| Resin Name | PC |
| Product Name | NOVAREX |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO1183 | Density | ISO1183 | g/cm^3 | 1.2 | - |
Water absorption Water absorption/- | Water absorption (23℃, in water) | - | % | 0.24 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO75-1,2 | Deflection temperature under load (1.80MPa) | ISO75-1,2 | ℃ | 129 | - |
Deflection temperature under load (0.45MPa) | ISO75-1,2 | ℃ | 139 | - | |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ISO 11359-2 | Linear expansion coefficient (MD) | ISO 11359-2 | ×10^-5/℃ | 6.5 | - |
Linear expansion coefficient (right angle) Linear expansion coefficient (right angle)/ISO11359-2 | Linear expansion coefficient (TD) | ISO11359-2 | ×10^-5/℃ | 6.6 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO527-1,2 | Yield Stress | ISO527-1,2 | MPa | 62 | - |
Tensile strain at break Tensile strain at break/ISO527-1,2 | Nominal breaking strain | ISO527-1,2 | % | 100 | - |
Tensile Modulus Tensile Modulus/ISO527-1,2 | Tensile Modulus | ISO527-1,2 | MPa | 2300 | - |
Bending strength Bending strength/ISO 178 | Bending strength | ISO 178 | MPa | 93 | - |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus | ISO 178 | MPa | 2300 | - |
Charpy impact strength Charpy impact strength/ISO179-1,2 | Charpy impact strength (unnotched, 23°C) | ISO179-1,2 | kJ/m^2 | NB | |
Charpy impact strength (notched, 23°C) | ISO179-1,2 | kJ/m^2 | 70 | - | |
Yield Strain Yield Strain/ISO527-1,2 | Yield Strain | ISO527-1,2 | % | 6 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/IEC 60093 | Volume resistivity | IEC 60093 | Ω・cm | NaN | - |
Surface resistance Surface resistance/IEC60093 | Surface resistance | IEC60093 | Ω | NaN | - |
Dielectric constant Dielectric constant/IEC 60250 | Dielectric constant (100Hz) | IEC 60250 | 3.1 | - | |
Dielectric constant (1MHz) | IEC 60250 | 3.1 | - | ||
Dielectric loss tangent Dielectric loss tangent/IEC 60250 | Dielectric loss tangent (100Hz) | IEC 60250 | 0.0006 | - | |
Dielectric tangent (1MHz) | IEC 60250 | 0.009 | - | ||
Dielectric Strength Dielectric Strength/IEC60243-1 | Withstand voltage (2mmt) | IEC60243-1 | MV/m | 24 | - |
Withstand voltage (3mmt) | IEC60243-1 | MV/m | 17 | - | |
Tracking resistance Tracking resistance/UL746A | Comparative Tracking Index (CTI) | UL746A | 2 | Quite |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ | Mold shrinkage rate MD(3.2mmt) | % | - | ||
Mold shrinkage rate TD Mold shrinkage rate TD/- | Mold shrinkage TD (3.2mmt) | - | % | - | |
ＭＦＲ ＭＦＲ/ISO1133 | Melt Mass Flow Rate | ISO1133 | g/10min | 2.4 | - |
ＭＶＲ ＭＶＲ/ISO1133 | Melt volume rate (300℃, 1.20kg) | ISO1133 | cm^3/10min | 2.3 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - |
| Key Features |
|---|
Blow Molding |
Copyright© 2026 PlaBase. All Rights Reserved.