Public Beta
Public Beta
| Manufacturer | Global Polyacetal Corporation |
| Resin Name | PA |
| Product Name | RENY |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO1183 | Density | ISO1183 | g/cm^3 | 1.52 | - |
Water absorption Water absorption/- | Water absorption (23℃, 50%RH) | - | 0.73 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO75-1、ISO75-2 | Deflection temperature under load (1.80 MPa, dry) | ISO75-1、ISO75-2 | ℃ | 232 | - |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ISO11359-2 | Linear expansion coefficient (MD) | ISO11359-2 | ×10^-5/℃ | 1.1 | - |
Linear expansion coefficient (right angle) Linear expansion coefficient (right angle)/ISO11359-2 | Linear expansion coefficient (TD) | ISO11359-2 | ×10^-5/℃ | 5.6 | - |
Melting point Melting point/ISO11357-3 | Melting Temperature | ISO11357-3 | ℃ | 257 | - |
Flammability Flammability/UL94 | Flammability (1.6mmt) | UL94 | NaN | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ISO527-1、ISO527-2 | Breaking stress (dry) | ISO527-1、ISO527-2 | MPa | 208 | - |
Breaking stress (50% RH) | ISO527-1、ISO527-2 | MPa | 202 | - | |
Tensile strain at break Tensile strain at break/ISO527-1、2 | Breaking strain (dry) | ISO527-1、2 | % | 2 | - |
Breaking strain (50% RH) | ISO527-1、2 | % | 2.2 | - | |
Tensile Modulus Tensile Modulus/ISO527-1、2 | Tensile modulus (dry) | ISO527-1、2 | MPa | 16000 | - |
Tensile modulus (50% RH) | ISO527-1、ISO527-2 | MPa | 15400 | - | |
Bending strength Bending strength/ISO178 | Bending strength (dry) | ISO178 | MPa | 349 | - |
Bending strength (50% RH) | ISO178 | MPa | 315 | - | |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus (dry) | ISO178 | MPa | 14300 | - |
Flexural modulus (50% RH) | ISO178 | MPa | 14000 | - | |
Charpy impact strength Charpy impact strength/ISO179-1、ISO179-2 | Charpy impact strength (unnotched, 23°C, dry) | ISO179-1、ISO179-2 | kJ/m^2 | 90 | - |
Charpy impact strength (unnotched, 23℃, 50%RH) | ISO179-1、ISO179-2 | kJ/m^2 | 77 | - | |
Charpy impact strength (notched, 23°C, dry) | ISO179-1、ISO179-2 | kJ/m^2 | 14.7 | - | |
Charpy impact strength (notched, 23℃, 50%RH) | ISO179-1、ISO179-2 | kJ/m^2 | 13.8 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Dielectric constant Dielectric constant/IEC60250 | Dielectric constant (100Hz, dry) | IEC60250 | 4.2 | - | |
Dielectric constant (100Hz, 50%RH) | IEC60250 | 4.6 | - | ||
Dielectric constant (1MHz, dry) | IEC60250 | 4.1 | - | ||
Dielectric constant (1MHz, 50%RH) | IEC60250 | 4.2 | - | ||
Dielectric loss tangent Dielectric loss tangent/IEC60250 | Dissipation factor (100Hz, dry) | IEC60250 | 0.0055 | - | |
Dielectric tangent (100Hz, 50%RH) | IEC60250 | 0.02 | - | ||
Dielectric loss tangent (1MHz, dry) | IEC60250 | 0.0067 | - | ||
Dielectric tangent (1MHz, 50%RH) | IEC60250 | 0.012 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage Mold shrinkage/- | Mold shrinkage | - | % | 0.32 | - |
ＭＦＲ ＭＦＲ/ISO1133 | Melt Mass Flow Rate | ISO1133 | g/10min | 12.7 | - |
ＭＶＲ ＭＶＲ/ISO1133 | Melt volume rate (280℃, 5kg) | ISO1133 | cm^3/10min | 8.5 | - |
Melt volume rate (280℃, 5kg) | ISO1133 | cm^3/10min | 8.5 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - |
| Key Features |
|---|
Glass fiber reinforced |
Copyright© 2025 PlaBase. All Rights Reserved.