Public Beta
Public Beta
| Manufacturer | Takayasu Co., Ltd. |
| Resin Name | PA6 |
| Product Name | Tanazin |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO1183 | Density | ISO1183 | g/cm^3 | 1.14 | - |
Water absorption Water absorption/- | Water absorption | - | ％ | 2.5 | 23℃ 50%RH |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO-75-1,2 | Deflection temperature under load (1.82MPa) | ISO-75-1,2 | 60 | - | |
Deflection temperature under load (0.46MPa) | ISO-75-1,2 | 150 | - | ||
Flammability Flammability/UL-94 | Flammability | UL-94 | NaN | Quite |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO527-1,2 | Tensile Yield Stress | ISO527-1,2 | MPa | 80 | - |
Tensile strain at break Tensile strain at break/ISO527-1,2 | Tensile strain at break | ISO527-1,2 | % | 90 | - |
Bending strength Bending strength/ISO178 | Bending strength | ISO178 | MPa | 90 | - |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus | ISO178 | MPa | 2500 | - |
Charpy impact strength Charpy impact strength/ISO179 | Charpy impact strength (notched) | ISO179 | 8 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/- | Mold shrinkage rate MD | - | % | 1.2 | - |
Mold shrinkage rate TD Mold shrinkage rate TD/- | Mold shrinkage rate TD | - | % | 1.4 | - |
| Key Features |
|---|
Low viscosity |
Copyright© 2025 PlaBase. All Rights Reserved.