Public Beta
Public Beta
| Manufacturer | Otsuka Chemical Co., Ltd. |
| Resin Name | PPS |
| Product Name | POTICON |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm3 | 1.76 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75 | Heat distortion temperature (1.8MPa) | ISO 75 | ℃ | 228 | - |
Linear expansion coefficient Linear expansion coefficient/ASTM D696 | Thermal expansion coefficient | ASTM D696 | ×10-5/℃ | 1.7 | - |
Flammability Flammability/UL94 | Flammability | UL94 | NaN | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Bending strength Bending strength/ISO 178 | Bending strength | ISO 178 | MPa | 106 | - |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus | ISO 178 | MPa | 12700 | - |
Izod impact strength Izod impact strength/ISO 180 | IZOD impact value notched | ISO 180 | J/m | 17 | - |
Surface hardness Surface hardness/ISO 2039 | Rockwell Hardness | ISO 2039 | M scale | 83 | - |
Tensile strength Tensile strength/ISO 527 | Tensile strength | ISO 527 | MPa | 71 | - |
Tensile elongation Tensile elongation/ISO 527 | Breaking Elongation | ISO 527 | % | 1.3 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/- | Molding shrinkage rate vertical | - | % | 0.5 | - |
Mold shrinkage rate TD Mold shrinkage rate TD/- | Horizontal mold shrinkage | - | % | 1.2 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Forming temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - |
| Key Features |
|---|
PPS-based, good sliding properties |
Copyright© 2025 PlaBase. All Rights Reserved.