Public Beta
Public Beta
| Manufacturer | Celanese Corporation |
| Resin Name | PET |
| Product Name | Rynite |
| ISO Material Code | PET-I-GF30 |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm^3 | 1.49 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75-1/-2 | Deflection temperature under load (1.80MPa) | ISO 75-1/-2 | ℃ | 220 | - |
Deflection temperature under load (0.45MPa) | ISO 75-1/-2 | ℃ | 237 | - | |
Linear expansion coefficient (MD) Linear expansion coefficient (MD)/ISO 11359-1/-2 | Linear expansion coefficient (parallel) | ISO 11359-1/-2 | x10^-5/℃ | 1.5 | - |
Linear expansion coefficient (TD) Linear expansion coefficient (TD)/ISO 11359-1/-2 | Linear expansion coefficient (right angle) | ISO 11359-1/-2 | x10^-5/℃ | 8.5 | - |
Melting point Melting point/ISO 11357-1/-3 | Melting temperature (10℃/min) | ISO 11357-1/-3 | ℃ | 250 | - |
Flammability Flammability/IEC 60695-11-10 | Flammability | IEC 60695-11-10 | class | NaN | 1.5mm |
Glass transition temperature Glass transition temperature/ISO 11357-1/-3 | Glass transition temperature (10℃/min) | ISO 11357-1/-3 | ℃ | 60 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ISO 527-1/-2 | Breaking Stress | ISO 527-1/-2 | MPa | 125 | - |
Tensile strain at break Tensile strain at break/ISO 527-1/-2 | Breaking Strain | ISO 527-1/-2 | % | 3.3 | - |
Tensile Modulus Tensile Modulus/ISO 527-1/-2 | Tensile Modulus | ISO 527-1/-2 | MPa | 9300 | - |
Charpy impact strength Charpy impact strength/ISO 179/1eA | Notched Charpy impact strength (23℃) | ISO 179/1eA | kJ/m^2 | 14 | - |
Notched Charpy impact strength (-30℃) | ISO 179/1eA | kJ/m^2 | 12 | - | |
Charpy impact strength (23℃) | ISO 179/1eU | kJ/m^2 | 70 | - | |
Charpy impact strength (-30℃) | ISO 179/1eU | kJ/m^2 | 86 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/IEC 62631-3-1 | Volume resistivity | IEC 62631-3-1 | Ω・cm | NaN | - |
Surface resistance Surface resistance/IEC 62631-3-2 | Surface resistance | IEC 62631-3-2 | Ω | NaN | - |
Dielectric constant Dielectric constant/IEC 62631-2-1 | Dielectric constant, 1MHz | IEC 62631-2-1 | 3.3 | - | |
Dielectric loss tangent Dielectric loss tangent/IEC 62631-2-1 | Dielectric tangent (1MHz) | IEC 62631-2-1 | E-4 | 150 | - |
Dielectric Strength Dielectric Strength/IEC 60243-1 | Withstand voltage | IEC 60243-1 | ｋV/ｍm | 43 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ISO 294-4, 2577 | Mold shrinkage rate (parallel) | ISO 294-4, 2577 | % | 0.2 | - |
Mold shrinkage rate (parallel) (with annealing) | ISO 294-4 | % | 0.1 | - | |
Mold shrinkage rate TD Mold shrinkage rate TD/ISO 294-4, 2577 | Mold shrinkage (vertical) | ISO 294-4, 2577 | % | 0.8 | - |
Molding Shrinkage (Vertical) (available at Amino) | ISO 294-4 | % | 0.25 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/- | Optimum resin temperature | - | ℃ | 285 | - |
Mold Temperature Mold Temperature/- | Optimal Mold Temperature | - | ℃ | 95 | - |
Drying conditions Drying conditions/- | Drying temperature | - | ℃ | 120 | 4 - 6h |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler Content | % | 30 | GF |
| Key Features |
|---|
Shock-resistance |
Copyright© 2026 PlaBase. All Rights Reserved.