Public Beta
Public Beta
| Manufacturer | Celanese Corporation |
| Resin Name | PA612 |
| Product Name | Zytel |
| ISO Material Code | PA612-GF43 |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm^3 | 1.42 | - |
Water absorption Water absorption/ISO 62 | Balanced water absorption (2mm) | ISO 62 | % | 0.7 | - |
Water absorption (soaking, 24h) | ISO 62 | % | 0.1 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75-1/-2 | Deflection temperature under load (1.80MPa) | ISO 75-1/-2 | ℃ | 203 | - |
Deflection temperature under load (0.45MPa) | ISO 75-1/-2 | ℃ | 217 | - | |
Linear expansion coefficient (MD) Linear expansion coefficient (MD)/ISO 11359-1/-2 | Linear expansion coefficient (parallel) | ISO 11359-1/-2 | x10^-5/℃ | 1.4 | - |
Linear expansion coefficient (TD) Linear expansion coefficient (TD)/ISO 11359-1/-2 | Linear expansion coefficient (right angle) | ISO 11359-1/-2 | x10^-5/℃ | 11 | - |
Melting point Melting point/ISO 11357-1/-3 | Melting temperature (10℃/min) | ISO 11357-1/-3 | ℃ | 218 | - |
Flammability Flammability/IEC 60695-11-10 | Flammability | IEC 60695-11-10 | NaN | 1.5ｍｍ |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ISO 527-1/-2 | Breaking stress (when completely dry) | ISO 527-1/-2 | MPa | 200 | - |
Breaking stress (when humidified) | ISO 527-1/-2 | MPa | 165 | - | |
Tensile strain at break Tensile strain at break/ISO 527-1/-2 | Breaking strain (when completely dry) | ISO 527-1/-2 | % | 3 | - |
Breaking strain (when humidity controlled) | ISO 527-1/-2 | % | 5 | - | |
Tensile Modulus Tensile Modulus/ISO 527-1/-2 | Tensile modulus (when completely dry) | ISO 527-1/-2 | MPa | 12500 | - |
Tensile modulus (when conditioned) | ISO 527-1/-2 | MPa | 11500 | - | |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus (when completely dry) | ISO 178 | MPa | 11000 | - |
Charpy impact strength Charpy impact strength/ISO 179/1eA | Notched Charpy impact strength (23°C) (when completely dry) | ISO 179/1eA | kJ/m^2 | 17 | - |
Notched Charpy impact strength (23°C) (humidified) | ISO 179/1eA | kJ/m^2 | 14 | - | |
Notched Charpy impact strength (-30℃) (absolutely dry) | ISO 179/1eA | kJ/m^2 | 17 | - | |
Notched Charpy impact strength (-30℃) (humidified) | ISO 179/1eA | kJ/m^2 | 13 | - | |
Notched Charpy impact strength (-40℃) (absolutely dry) | ISO 179/1eA | kJ/m^2 | 17 | - | |
Charpy impact strength (23℃) (when completely dry) | ISO 179/1eU | kJ/m^2 | 100 | - | |
Charpy impact strength (23℃) (humidified) | ISO 179/1eU | kJ/m^2 | 100 | - | |
Charpy impact strength (-30℃) (when completely dry) | ISO 179/1eU | kJ/m^2 | 85 | - | |
Charpy impact strength (-30℃) (humidified) | ISO 179/1eU | kJ/m^2 | 80 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/IEC 62631-3-1 | Volume resistivity | IEC 62631-3-1 | Ω・cm | NaN | - |
Dielectric constant Dielectric constant/IEC 62631-2-1 | Dielectric constant, 1MHz (when completely dry) | IEC 62631-2-1 | 3.6 | - | |
Dielectric loss tangent Dielectric loss tangent/IEC 62631-2-1 | Dielectric tangent, 1MHz (when completely dry) | IEC 62631-2-1 | E-4 | 200 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/- | Optimum resin temperature | - | ℃ | 290 | - |
Mold Temperature Mold Temperature/- | Optimal Mold Temperature | - | ℃ | 100 | - |
Drying conditions Drying conditions/- | Drying temperature | - | ℃ | 80 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler Content | % | 43 | GF |
Copyright© 2025 PlaBase. All Rights Reserved.