Public Beta
Public Beta
| Manufacturer | DSM Engineering Materials Ltd. |
| Resin Name | Special PA |
| Product Name | Forty |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm^3 | 1.58 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75-1,2 | Deflection temperature under load (1.80MPa) | ISO 75-1,2 | ℃ | 290 | - |
Deflection temperature under load (0.45MPa) | ISO 75-1,2 | ℃ | 310 | - | |
Flammability Flammability/UL 94 | Flammability | UL 94 | NaN | 0.4mm |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ISO 527-1,2 | Tensile Breaking Stress (DRY) | ISO 527-1,2 | MPa | 120 | - |
Tensile strain at break Tensile strain at break/ISO 527-1,2 | Tensile strain at break (DRY) | ISO 527-1,2 | % | 1.6 | - |
Charpy impact strength Charpy impact strength/ISO 179 | Charpy impact strength (DRY) | ISO 179 | kJ/m^2 | 3 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Dielectric constant Dielectric constant/IEC 60250 | Specific dielectric rate (DRY) | IEC 60250 | - | 4.05 | - |
Tracking resistance Tracking resistance/IEC 60112V | Tracking resistance | IEC 60112V | 400 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage Mold shrinkage/ISO 294-4 | ISO 294-4 | % | - |
| Key Features |
|---|
High heat resistance, 30% glass reinforced, PA4T, flame retardant, halogen-free & red phosphorus-free |
Copyright© 2025 PlaBase. All Rights Reserved.