Public Beta
Public Beta
| Manufacturer | Morimar Matex Co., Ltd. |
| Resin Name | PPS |
| Product Name | Afcom |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/JIS K 7112 | Proportion | JIS K 7112 | 2 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ASTM D 648 | Deflection temperature under load (1.80MPa) | ASTM D 648 | ℃ | 260 | - |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ASTM D 696 | Linear expansion coefficient (flow) | ASTM D 696 | x10^-5/℃ | 1.2 | - |
Linear expansion coefficient (right angle) Linear expansion coefficient (right angle)/ASTM D 696 | Linear expansion coefficient (right angle) | ASTM D 696 | x10^-5/℃ | 1.5 | - |
Flammability Flammability/UL 94 | Flammability | UL 94 | NaN | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Bending strength Bending strength/ASTM D 790 | Bending strength | ASTM D 790 | MPa | 137 | - |
Flexural modulus Flexural modulus/ASTM D 790 | Flexural modulus | ASTM D 790 | MPa | 20700 | - |
Tensile strength Tensile strength/ASTM D 638 | Tensile strength | ASTM D 638 | MPa | 85 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/AGC method | Mold shrinkage rate MD | AGC method | % | 0.1 | - |
Mold shrinkage rate TD Mold shrinkage rate TD/AGC method | Mold shrinkage rate TD | AGC method | % | 0.29 | - |
| Key Features |
|---|
Precision series, low warpage, low torsion, good flow |
Copyright© 2025 PlaBase. All Rights Reserved.