Public Beta
Public Beta
| Manufacturer | Unitika Ltd. |
| Resin Name | Special Resin |
| Product Name | Terramac |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm^3 | 1.47 | - |
Water absorption Water absorption/ISO 62 | Water absorption (23℃×50%RH balance) | ISO 62 | % | 0.18 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75 | Deflection temperature under load (1.82MPa) | ISO 75 | ℃ | 155 | - |
Deflection temperature under load (0.45MPa) | ISO 75 | ℃ | 163 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ISO 527 | Tensile breaking stress | ISO 527 | MPa | 99 | - |
Tensile strain at break Tensile strain at break/ISO 527 | Tensile strain at break | ISO 527 | % | 2.4 | - |
Bending strength Bending strength/ISO 178 | Bending strength | ISO 178 | MPa | 150 | - |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus | ISO 178 | MPa | 9400 | - |
Charpy impact strength Charpy impact strength/ISO 179 | Charpy impact strength (notched) | ISO 179 | kJ/m^2 | 6 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Haze Haze/ | Haze (3mmt) | Opaque | |||
Total light transmittance Total light transmittance/ | Light transmittance (3mmt) | Opaque |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage Mold shrinkage/ | Mold shrinkage rate (3mmt) | % | - | ||
ＭＦＲ ＭＦＲ/ISO 1133 | ＭＦＲ(190℃×21.2N) | ISO 1133 | g/10min | 2 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - |
| Key Features |
|---|
Biomass plastic, injection grade, heat resistant, durable, GF reinforced |
Copyright© 2025 PlaBase. All Rights Reserved.