Public Beta
Public Beta
| Manufacturer | SABIC - SHPP Japan |
| Resin Name | PC resin |
| Product Name | THERMOCOMP COMPOUND |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ASTM D792 | Density | ASTM D792 | g/cm^3 | 1.52 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ASTM D648 | HDT (1.82 MPa, 3.2 mm, no annealing) | ASTM D648 | ℃ | 114 | - |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ASTM E831 | CTE(-40℃～+40℃)(flow direction) | ASTM E831 | x10^-5/℃ | 1.54 | - |
Linear expansion coefficient (right angle) Linear expansion coefficient (right angle)/ASTM E831 | CTE (-40℃～+40℃)(vertical direction) | ASTM E831 | x10^-5/℃ | 5.63 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ASTEM D638 | Tensile strength (break point) (Type I, 5mm/min) | ASTEM D638 | MPa | 143 | - |
Tensile strain at break Tensile strain at break/ASTM D638 | Tensile elongation (break point) (Type I, 5 mm/min) | ASTM D638 | % | 2.3 | - |
Tensile Modulus Tensile Modulus/ASTM D638 | Tensile elasticity (5mm/min) | ASTM D638 | MPa | 11720 | - |
Bending strength Bending strength/ASTM D790 | Flexural strength (break point) (1.3mm/min, 50mm span) | ASTM D790 | MPa | 186 | - |
Flexural modulus Flexural modulus/ASTM D790 | Bending elasticity (1.3mm/min, 50mm span) | ASTM D790 | MPa | 9750 | - |
Charpy impact strength Charpy impact strength/ISO 179-1eU | Sharopy strength 23℃ (Unnotch Edgew 80*10*4 sp=62mm) | ISO 179-1eU | kJ/m^2 | 33 | - |
Sharoppy strength 23℃ (V-notch Edgew 80*10*4 sp=62mm) | ISO 179-1eA | kJ/m^2 | 13 | - | |
Izod impact strength Izod impact strength/ASTM D256 | Izod impact strength (notched, 23℃) | ASTM D256 | J/m | 140 | - |
Izod impact strength (unnotched, 23℃) | ASTM D4812 | J/m | 521 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ASTM D955 | Mold shrinkage rate (flow direction) (24 hours) | ASTM D955 | % | - | |
Mold shrinkage rate TD Mold shrinkage rate TD/ASTM D955 | Mold shrinkage (vertical direction) (24 hours) | ASTM D955 | % | - | |
ＭＦＲ ＭＦＲ/ASTM D1238 | Melt flow rate (300℃/2.16kgf) | ASTM D1238 | g/10min | 17.9 | - |
Melt flow rate (300℃/5.0kgf) | ASTM D1238 | g/10min | 57 | - | |
ＭＶＲ ＭＶＲ/ASTM D1238 | Melt volume rate (300℃/5.0kgf) | ASTM D1238 | cm3/10min | 42 | - |
Melt volume rate (300℃/2.16kgf) | ISO 1133 | cm3/10min | 14 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying temperature | ℃ | 110 | 3-6hr |
| Key Features |
|---|
Flame retardant, high rigidity, high toughness, glass fiber reinforced |
Copyright© 2025 PlaBase. All Rights Reserved.