Public Beta
Public Beta
| Manufacturer | SABIC - SHPP Japan |
| Resin Name | PEI resin |
| Product Name | LUBRICOMP COMPOUND |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ASTM D792 | Proportion | ASTM D792 | 1.48 | - | |
Water absorption Water absorption/ASTM D570 | Water absorption rate (24 hours) | ASTM D570 | % | 0.18 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ASTM D648 | HDT (0.45 MPa, 3.2 mm, no annealing) | ASTM D648 | ℃ | 213 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/SABIC Method | Tensile strength (yield point) | SABIC Method | MPa | 125 | - |
Tensile strain at break Tensile strain at break/ASTM D638 | Tensile elongation (at break) | ASTM D638 | % | 3 | - |
Bending strength Bending strength/ASTM D790 | Bending strength | ASTM D790 | MPa | 190 | - |
Flexural modulus Flexural modulus/ASTM D790 | Bending Elasticity | ASTM D790 | MPa | 6470 | - |
Izod impact strength Izod impact strength/ASTM D256 | Izod impact strength (notched, 23℃) | ASTM D256 | J/m | 78 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Surface resistance Surface resistance/ASTM D257 | Surface resistance | ASTM D257 | Ω | NaN | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/SABIC method | Mold shrinkage rate (flow direction) (3.2mm) | SABIC method | % | - |
| Key Features |
|---|
Sliding wear resistance |
Copyright© 2025 PlaBase. All Rights Reserved.