Public Beta
Public Beta
| Manufacturer | SABIC - SHPP Japan |
| Resin Name | Polyetherimide |
| Product Name | ULTEM |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ASTM D792 | Proportion | ASTM D792 | 1.42 | - | |
Water absorption Water absorption/ASTM D570 | Water absorption rate (24 hours) | ASTM D570 | % | 0.19 | - |
Balanced water absorption (23℃) | ASTM D570 | % | 1.1 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Vicat softening temperature Vicat softening temperature/ASTM D1525 | Vicat softening point (Rate B/50) | ASTM D1525 | ℃ | 220 | - |
Deflection Temperature under Load Deflection Temperature under Load/ASTM D648 | HDT (0.45 MPa, 6.4 mm, no annealing) | ASTM D648 | ℃ | 210 | - |
HDT (1.82 MPa, 6.4 mm, no annealing) | ASTM D648 | ℃ | 210 | - | |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ASTM E831 | CTE(-20℃～+150℃)(flow direction) | ASTM E831 | x10^-5/℃ | 2.52 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ASTEM D638 | Tensile strength (break point) (Type I, 5mm/min) | ASTEM D638 | MPa | 131 | - |
Tensile strain at break Tensile strain at break/ASTM D638 | Tensile elongation (break point) (Type I, 5 mm/min) | ASTM D638 | % | 4 | - |
Tensile Modulus Tensile Modulus/ASTM D638 | Tensile elasticity (5mm/min) | ASTM D638 | MPa | 6890 | - |
Bending strength Bending strength/ASTM D790 | Bending strength (break point) (2.6mm/min, 100mm span) | ASTM D790 | MPa | 227 | - |
Flexural modulus Flexural modulus/ASTM D790 | Bending elasticity (2.6mm/min, 100mm span) | ASTM D790 | MPa | 6890 | - |
Izod impact strength Izod impact strength/ASTM D256 | Izod impact strength (notched, 23℃) | ASTM D256 | J/m | 64 | - |
Izod impact strength (reverse notched, 3.2 mm) | ASTM D256 | J/m | 464 | - | |
Izod impact strength (unnotched, 23℃) | ASTM D4812 | J/m | 480 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/ASTM D257 | Volume Resistivity | ASTM D257 | Ω・cm | NaN | - |
Dielectric constant Dielectric constant/ASTM D150 | Specific permittivity, 1kHz | ASTM D150 | - | 3.5 | - |
Dielectric Strength Dielectric Strength/ASTM D149 | Dielectric breakdown strength (in oil) (1.6mm) | ASTM D149 | kV/mm | 26.3 | - |
Arc Resistance Arc Resistance/ASTM D495 | Arc Resistance, Tungsten (PLC) | ASTM D495 | PLC Code | 6 | 60≦D495<120 |
Tracking resistance Tracking resistance/UL 746A | CTI(Comparative Tracking Index)(UL,PLC) | UL 746A | PLC Code | 4 | 100≦CTI<175 |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/SABIC method | Mold shrinkage rate (flow direction) (3.2mm) | SABIC method | % | - | |
ＭＦＲ ＭＦＲ/ASTM D1238 | Melt flow rate (337℃/6.6kgf) | ASTM D1238 | g/10min | 6 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying temperature | ℃ | 150 | 4-6hr |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler Content | % | 20 | GF |
| Main Applications |
|---|
Heavy trucks, car interiors, buses, under the hood of cars, electronic devices, displays, lighting, electrical components |
| Key Features |
|---|
Glass fiber reinforced, heat resistant, high strength, chemical resistant |
Copyright© 2025 PlaBase. All Rights Reserved.