Public Beta
Public Beta
| Manufacturer | SABIC - SHPP Japan |
| Resin Name | Polyetherimide |
| Product Name | ULTEM |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ASTM D792 | Proportion | ASTM D792 | 1.28 | - | |
Water absorption Water absorption/ASTM D570 | Water absorption rate (24 hours) | ASTM D570 | % | 0.16 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ASTM D648 | HDT (1.82 MPa, 6.4 mm, no annealing) | ASTM D648 | ℃ | 207 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ASTM D638 | Tensile strength (yield point) (Type I, 5 mm/min) | ASTM D638 | MPa | 99 | - |
Tensile strain at break Tensile strain at break/ASTM D638 | Tensile elongation (break point) (Type I, 5 mm/min) | ASTM D638 | % | 60 | - |
Tensile Modulus Tensile Modulus/ASTM D638 | Tensile elasticity (5mm/min) | ASTM D638 | MPa | 2890 | - |
Bending strength Bending strength/ASTM D790 | Bending strength (yield point) (2.6mm/min, 100mm span) | ASTM D790 | MPa | 137 | - |
Flexural modulus Flexural modulus/ASTM D790 | Bending elasticity (2.6mm/min, 100mm span) | ASTM D790 | MPa | 3100 | - |
Izod impact strength Izod impact strength/ASTM D256 | Izod impact strength (notched, 23℃) | ASTM D256 | J/m | 64 | - |
Izod impact strength (reverse notched, 3.2 mm) | ASTM D256 | J/m | 2082 | - | |
Izod impact strength (unnotched, 23℃) | ASTM D4812 | J/m | 1281 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/ASTM D257 | Volume Resistivity | ASTM D257 | Ω・cm | NaN | - |
Dielectric constant Dielectric constant/ASTM D150 | Dielectric constant, 100Hz | ASTM D150 | - | 3.12 | - |
Dielectric Strength Dielectric Strength/ASTM D149 | Dielectric breakdown strength (in oil) (3.2mm) | ASTM D149 | kV/mm | 17.9 | - |
Tracking resistance Tracking resistance/UL 746A | CTI(Comparative Tracking Index)(UL,PLC) | UL 746A | PLC Code | 4 | 100≦CTI<175 |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/SABIC method | Mold shrinkage rate (flow direction) (3.2mm) | SABIC method | % | - | |
ＭＦＲ ＭＦＲ/ASTM D1238 | Melt flow rate (337℃/6.6kgf) | ASTM D1238 | g/10min | 4.2 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying temperature | ℃ | 150 | 4-6hr |
| Main Applications |
|---|
Heavy trucks, car interiors, buses, under the hood of cars |
| Key Features |
|---|
Chemical resistance |
Copyright© 2025 PlaBase. All Rights Reserved.