Public Beta
Public Beta
| Manufacturer | SABIC Petrochemicals Japan |
| Resin Name | PP |
| Product Name | SABIC PP |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ASTM D792 | Density (23℃) | ASTM D792 | g/cm^3 | 0.905 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Vicat softening temperature Vicat softening temperature/ASTM D1525 | Vicat softening point | ASTM D1525 | ℃ | 149 | - |
Deflection Temperature under Load Deflection Temperature under Load/ASTM D648 | Heat distortion temperature (455kPa) | ASTM D648 | ℃ | 105 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ASTM D638 | Tensile strength (yield point) | ASTM D638 | MPa | 25 | - |
Flexural modulus Flexural modulus/ASTM D790A | Bending elasticity (1% secant) | ASTM D790A | MPa | 1350 | - |
Izod impact strength Izod impact strength/ASTM D256 | Izod impact strength (notched, 23℃) | ASTM D256 | J/m | 65 | - |
Izod impact strength (notched, -20℃) | ASTM D256 | J/m | 35 | - | |
Surface hardness Surface hardness/ASTM D785 | Rockwell Hardness | ASTM D785 | R scale | 80 | - |
Yield Strain Yield Strain/ASTM D638 | Tensile elongation (yield point) | ASTM D638 | % | 5 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage Mold shrinkage/ | Mold shrinkage | % | Depends on thickness and molding conditions | ||
ＭＦＲ ＭＦＲ/ASTM D1238 | Melt flow rate (230℃/2.16kg) | ASTM D1238 | g/10min | 70 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | Thick walled products: Maximum 65℃ |
| Main Applications |
|---|
Hard packaging for dairy products, frozen foods, refrigerated foods, etc. |
| Key Features |
|---|
High rigidity, high fluidity, low odor |
Copyright© 2025 PlaBase. All Rights Reserved.