Public Beta
Public Beta
| Manufacturer | BASF Japan Ltd. |
| Resin Name | TPU |
| Product Name | Elastollan |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/DIN EN ISO 1183-1-A | Density | DIN EN ISO 1183-1-A | g/cm^3 | 1.39 | - |
Water absorption Water absorption/DIN EN ISO 62 Method 1 | Water absorption (23℃, immersed in water) | DIN EN ISO 62 Method 1 | % | 0.9 | - |
Water absorption rate (relative humidity 50%, immersion in water) | DIN EN ISO 62 Method 4 | % | 0.4 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Vicat softening temperature Vicat softening temperature/DIN EN ISO 306 | Vicat softening temperature (10N, 120℃/h) (VST A120) | DIN EN ISO 306 | % | 162 | - |
Deflection Temperature under Load Deflection Temperature under Load/DIN EN ISO 75-2/B | Deflection temperature (0.45MPa) | DIN EN ISO 75-2/B | ℃ | 139 | - |
Linear expansion coefficient Linear expansion coefficient/ISO 11359-2 | Coefficient of linear expansion (CLTE, 23℃) | ISO 11359-2 | ×10^-5/℃ | 3.129 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile strain at break Tensile strain at break/DIN 53504-S2 | Breaking Elongation | DIN 53504-S2 | % | 6 | - |
Breaking Elongation | DIN EN ISO 527-2/1A/50 | % | 8 | - | |
Tensile Modulus Tensile Modulus/DIN EN ISO 527-2/1A/1 | Tensile Modulus | DIN EN ISO 527-2/1A/1 | MPa | 2700 | - |
Charpy impact strength Charpy impact strength/DIN EN ISO 179-1 | Charpy impact strength (23℃) | DIN EN ISO 179-1 | kJ/m^2 | 63 | - |
Charpy impact strength (-30℃) | DIN EN ISO 179-1 | kJ/m^2 | 65 | - | |
Charpy impact strength (notched, 23℃) | DIN EN ISO 179-1 | kJ/m^2 | 18 | - | |
Charpy impact strength (notched, -30℃) | DIN EN ISO 179-1 | kJ/m^2 | 11 | - | |
Surface hardness Surface hardness/DIN ISO 48-4(3s) | Hardness | DIN ISO 48-4(3s) | Shore D | 67 | - |
Tensile strength Tensile strength/DIN 53504-S2 | Tensile strength | DIN 53504-S2 | MPa | 35 | - |
Tensile strength | DIN EN ISO 527-2/1A/50 | MPa | 55 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/DIN EN 62631-3-1 | Volume resistivity (500V, after moisture absorption) | DIN EN 62631-3-1 | Ω・cm | NaN | - |
Volume resistivity (500V, dry) | DIN EN 62631-3-1 | Ω・cm | NaN | - | |
Tracking resistance Tracking resistance/IEC 60112 | CTI test (3mm test plate) | IEC 60112 | 600 -0.1 |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate TD Mold shrinkage rate TD/DIN 294-4 | Mold shrinkage (transverse direction) | DIN 294-4 | % | 0.27 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Pre-drying | ℃ | 2~3 hours |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Glass Fiber Content | % | 15 | - |
| Color |
|---|
Natural |
| Main Applications |
|---|
Injection Molding, Automotive, Busbar |
| Key Features |
|---|
Halogen-free, flame-retardant glass fiber blend (imported) |
Copyright© 2025 PlaBase. All Rights Reserved.