Public Beta
Public Beta
| Manufacturer | Mitsubishi Chemical Corporation |
| Resin Name | PP |
| Product Name | PYROFIL pellet |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/JIS K7112 | Density | JIS K7112 | g/cm^3 | 0.98 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/JIS K7191 | Deflection temperature under load (1.80MPa) | JIS K7191 | ℃ | 153 | - |
Deflection temperature under load (0.45MPa) | JIS K7191 | ℃ | 161 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/JIS K7162 | Tensile breaking stress (1A/5) | JIS K7162 | MPa | 98 | - |
Tensile strain at break Tensile strain at break/JIS K7162 | Nominal breaking strain | JIS K7162 | % | 3 | - |
Bending strength Bending strength/JIS K7171 | Bending strength (1A/2) | JIS K7171 | MPa | 159 | - |
Flexural modulus Flexural modulus/JIS K7171 | Flexural modulus | JIS K7171 | MPa | 9480 | - |
Charpy impact strength Charpy impact strength/JIS K7111 | Charpy impact strength (notched) | JIS K7111 | kJ/m^2 | 5 | - |
Charpy impact strength (unnotched) | JIS K7111 | kJ/m^2 | 30 | - | |
Surface hardness Surface hardness/ | Surface hardness (Rockwell) | M | 70 | - | |
Surface hardness (Rockwell) | R | 104 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
MVR MVR/JIS K7210 | Melt volume flow rate (230℃/2.16kg) | JIS K7210 | cm^3/10min | 12 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | 230 | - | |
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | 80 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler Content | % | 14 | CF: Carbon fiber |
| Key Features |
|---|
Low specific gravity, lightweight, good appearance |
Copyright© 2025 PlaBase. All Rights Reserved.