Public Beta
Public Beta
| Manufacturer | Lotte Chemical Japan Co., Ltd. |
| Resin Name | ABS |
| Product Name | starex |
| ISO Material Code | ABS |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Proportion | ISO 1183 | 1.18 | - | |
Proportion | ASTM D792 | 1.18 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Vicat softening temperature Vicat softening temperature/ISO 306 | Vicat softening temperature (B/50) | ISO 306 | ℃ | 107 | - |
Vicat softening temperature (B/120) | ISO 306 | ℃ | 112 | - | |
Deflection Temperature under Load Deflection Temperature under Load/ISO 75-2 | Heat distortion temperature (without annealing) (1.80MPa, 4.0mm) | ISO 75-2 | ℃ | 101 | - |
Heat distortion temperature (18.56kgf/cm^2, 6.4mm) | ASTM D648 | ℃ | 101 | - | |
Flammability Flammability/UL 94 | Flammability | UL 94 | NaN | 1.5mm/3.0mm/6.0mm |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO 527 | Tensile strength (yield point), 50mm/min | ISO 527 | MPa | 85 | - |
Tensile strength (yield point), 5mm/min | ASTM D638 | MPa | 78.45 | - | |
Tensile breaking stress Tensile breaking stress/ISO 527 | Tensile strength (break point), 50mm/min | ISO 527 | MPa | 101 | - |
Tensile strength (break point), 5mm/min | ASTM D638 | MPa | 93.16 | - | |
Tensile strain at break Tensile strain at break/ISO 527 | Tensile strain (break point), 50mm/min | ISO 527 | % | 2.8 | - |
Tensile strain (break point), 5mm/min | ASTM D638 | % | 2.9 | - | |
Tensile Modulus Tensile Modulus/ISO 527 | Tensile modulus, 50mm/min | ISO 527 | MPa | 5600 | - |
Tensile modulus, 5mm/min | ASTM D638 | MPa | 5295.59 | - | |
Bending strength Bending strength/ISO 178 | Bending strength, 2mm/min | ISO 178 | MPa | 110 | - |
Bending strength, 2.8mm/min | ASTM D790 | MPa | 88.26 | - | |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus, 2mm/min | ISO 178 | MPa | 5700 | - |
Flexural modulus: 2.8mm/min | ASTM D790 | MPa | 4756.23 | - | |
Charpy impact strength Charpy impact strength/ISO 179 1eA | Charpy impact strength (with V notch), 23℃, 4mm | ISO 179 1eA | kJ/m^2 | 9 | - |
Izod impact strength Izod impact strength/ISO 180 1A | Izod impact strength (notched), 23℃, 4mm | ISO 180 1A | kJ/m^2 | 8 | - |
Izod impact strength (notched), 1/8 inch, 23℃ | ASTM D256 | J/m | 58.8 | - | |
Surface hardness Surface hardness/ISO 2039-2 | Rockwell Hardness | ISO 2039-2 | R scale | 114 | - |
Rockwell Hardness | ASTM D785 | R scale | 112 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ASTM D955 | Mold shrinkage (MD), Flow at 3.2mm | ASTM D955 | % | - | |
MFR MFR/ISO 1133 | Melt mass flow rate (220℃, 10kg) | ISO 1133 | g/10min | 7 | - |
Melt mass flow rate (220℃, 10kg) | ASTM D1238 | g/10min | 7 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler Content | % | 20 | GF |
Copyright© 2025 PlaBase. All Rights Reserved.