Public Beta
Public Beta
| Manufacturer | Lotte Chemical Japan Co., Ltd. |
| Resin Name | ABS |
| Product Name | starex |
| ISO Material Code | ABS |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ASTM D792 | Proportion | ASTM D792 | 1.06 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Vicat softening temperature Vicat softening temperature/ISO 306 | Vicat softening temperature (B/50) | ISO 306 | ℃ | 113 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO 527 | Tensile strength (yield point), 50mm/min | ISO 527 | MPa | 50 | - |
Tensile strength (yield point), 50mm/min | ASTM D638 | MPa | 43.15 | - | |
Bending strength Bending strength/ISO 178 | Bending strength, 2mm/min | ISO 178 | MPa | 85 | - |
Bending strength, 2.8mm/min | ASTM D790 | MPa | 60.8 | - | |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus, 2mm/min | ISO 178 | MPa | 2500 | - |
Flexural modulus: 2.8mm/min | ASTM D790 | MPa | 2059.4 | - | |
Charpy impact strength Charpy impact strength/ISO 179 1eA | Charpy impact strength (with V notch), 23℃, 4mm | ISO 179 1eA | kJ/m^2 | 15 | - |
Izod impact strength Izod impact strength/ISO 180 1A | Izod impact strength (notched), 23℃, 4mm | ISO 180 1A | kJ/m^2 | 15 | - |
Izod impact strength (notched), 1/4 inch, 23℃ | ASTM D256 | J/m | 117.6 | - | |
Izod impact strength (notched), 1/8 inch, 23℃ | ASTM D256 | J/m | 147 | - | |
Surface hardness Surface hardness/ISO 2039-2 | Rockwell Hardness | ISO 2039-2 | R scale | 113 | - |
Rockwell Hardness | ASTM D785 | R scale | 113 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ASTM D955 | Mold shrinkage (MD), Flow at 3.2mm | ASTM D955 | % | - | |
Mold shrinkage rate TD Mold shrinkage rate TD/ASTM D955 | Mold shrinkage (TD), X-Flow at 3.2mm | ASTM D955 | % | - | |
MFR MFR/ISO 1133 | Melt mass flow rate (220℃, 10kg) | ISO 1133 | g/10min | 4 | - |
Melt mass flow rate (220℃, 10kg) | ASTM D1238 | g/10min | 4 | - |
| Main Applications |
|---|
Door module, rear lamp housing |
| Key Features |
|---|
High heat resistance, low odor |
Copyright© 2025 PlaBase. All Rights Reserved.