Public Beta
Public Beta
| Manufacturer | Delrin Japan Co., Ltd. |
| Resin Name | POM |
| Product Name | Delrin |
| ISO Material Code | POM |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm3 | 1.42 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75-1/-2 | Deflection temperature under load: 1.80MPa | ISO 75-1/-2 | ℃ | 115 | - |
Deflection temperature under load, 0.45MPa | ISO 75-1/-2 | ℃ | 165 | - | |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ISO 11359-1/-2 | Linear expansion coefficient, parallel | ISO 11359-1/-2 | x10^-5/℃ | 9.5 | - |
Linear expansion coefficient (right angle) Linear expansion coefficient (right angle)/ISO 11359-1/-2 | Linear expansion coefficient, right angle | ISO 11359-1/-2 | x10^-5/℃ | 9.5 | - |
Melting point Melting point/ISO 11357-1/-3 | Melting temperature, 10℃/min | ISO 11357-1/-3 | ℃ | 178 | - |
Flammability Flammability/ISO 3795(FMVSS 302) | FMVSS Class | ISO 3795(FMVSS 302) | NaN | - | |
Combustibility 1.5mm nominal thickness | IEC 60695-11-10 | Class | NaN | - | |
Combustibility 0.8mm nominal thickness | IEC 60695-11-10 | Class | NaN | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO 527-1/-2 | Yield Stress | ISO 527-1/-2 | MPa | 75 | - |
Tensile strain at break Tensile strain at break/ISO 527-1/-2 | Nominal breaking strain | ISO 527-1/-2 | % | 25 | - |
Tensile Modulus Tensile Modulus/ISO 527-1/-2 | Tensile Modulus | ISO 527-1/-2 | MPa | 3500 | - |
Bending strength Bending strength/ISO 178 | Bending stress, 3.5% | ISO 178 | MPa | 89 | - |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus | ISO 178 | MPa | 3200 | - |
Charpy impact strength Charpy impact strength/ISO 179/1eA | Notched Charpy impact strength, 23℃ | ISO 179/1eA | kJ/m^2 | 7 | - |
Notched Charpy impact strength, -30℃ | ISO 179/1eA | kJ/m^2 | 6.5 | - | |
Charpy impact strength, 23℃ | ISO 179/1eU | kJ/m^2 | 235 | - | |
Surface hardness Surface hardness/ISO 2039-2 | Rockwell hardness, M scale | ISO 2039-2 | 95 | - | |
Rockwell hardness, R scale | ISO 2039-2 | 122 | - | ||
Yield Strain Yield Strain/ISO 527-1/-2 | Yield Strain | ISO 527-1/-2 | % | 13 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/IEC 62631-3-1 | Volume resistivity | IEC 62631-3-1 | Ω・m | NaN | - |
Surface resistance Surface resistance/IEC 62631-3-2 | Surface resistance | IEC 62631-3-2 | Ω | NaN | - |
Dielectric constant Dielectric constant/IEC 62631-2-1 | Dielectric constant, 100Hz | IEC 62631-2-1 | 3.9 | - | |
Dielectric constant, 1MHz | IEC 62631-2-1 | 3.9 | - | ||
Dielectric loss tangent Dielectric loss tangent/IEC 62631-2-1 | Dielectric loss tangent, 100Hz | IEC 62631-2-1 | 40×10^4 | ||
Dielectric loss tangent, 1MHz | IEC 62631-2-1 | 45×10^4 | |||
Tracking resistance Tracking resistance/IEC 60112 | Tracking resistance | IEC 60112 | 600 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ISO 294-4,2577 | Mold shrinkage, parallel | ISO 294-4,2577 | % | 1.8 | - |
Mold shrinkage rate TD Mold shrinkage rate TD/ISO 294-4,2577 | Mold shrinkage, vertical | ISO 294-4,2577 | % | 1.8 | - |
MFR MFR/ISO 1133 | Melt mass flow rate (2.16kg, 190℃) | ISO 1133 | g/10min | 14 | - |
ＭＶＲ ＭＶＲ/ISO 1133 | Melt volume rate (2.16kg, 190℃) | ISO 1133 | cm^3/10min | 13 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Optimum resin temperature | ℃ | 205 | Injection Molding | |
Mold Temperature Mold Temperature/ | Optimal Mold Temperature | ℃ | 90 | Injection Molding | |
Drying conditions Drying conditions/ | Drying temperature | ℃ | 2-4h, injection molding |
| Main Applications |
|---|
Machinery Parts |
| Key Features |
|---|
POM resin, medium viscosity |
Copyright© 2025 PlaBase. All Rights Reserved.