Public Beta
Public Beta
| Manufacturer | Celanese Corporation |
| Resin Name | PPA |
| Product Name | Zytel |
| ISO Material Code | PA6T/66-GF45 |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm^3 | 1.56 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75-1/-2 | Deflection temperature under load (1.80MPa) | ISO 75-1/-2 | ℃ | 286 | - |
Deflection temperature under load (0.45MPa) | ISO 75-1/-2 | ℃ | 300 | - | |
Linear expansion coefficient (MD) Linear expansion coefficient (MD)/ISO 11359-1/-2 | Linear expansion coefficient (parallel) | ISO 11359-1/-2 | x10^-5/℃ | 1.8 | - |
Linear expansion coefficient (TD) Linear expansion coefficient (TD)/ISO 11359-1/-2 | Linear expansion coefficient (right angle) | ISO 11359-1/-2 | x10^-5/℃ | 6.6 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ISO 527-1/-2 | Breaking stress (when completely dry) | ISO 527-1/-2 | MPa | 240 | - |
Tensile strain at break Tensile strain at break/ISO 527-1/-2 | Breaking strain (when completely dry) | ISO 527-1/-2 | % | 2.3 | - |
Tensile Modulus Tensile Modulus/ISO 527-1/-2 | Tensile modulus (when completely dry) | ISO 527-1/-2 | MPa | 15000 | - |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus (when completely dry) | ISO 178 | MPa | 13500 | - |
Charpy impact strength Charpy impact strength/ISO 179/1eA | Notched Charpy impact strength (23°C) (when completely dry) | ISO 179/1eA | kJ/m^2 | 11 | - |
Charpy impact strength (23℃) (when completely dry) | ISO 179/1eU | kJ/m^2 | 60 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/IEC 62631-3-1 | Volume resistivity (when completely dry) | IEC 62631-3-1 | Ω・cm | NaN | - |
Volume resistivity (when humidity controlled) | IEC 62631-3-1 | Ω・ｃm | NaN | - | |
Surface resistance Surface resistance/IEC 62631-2-3 | Surface resistivity (humidity controlled) | IEC 62631-2-3 | Ω | NaN | - |
Dielectric loss tangent Dielectric loss tangent/IEC 62631-2-1 | Dielectric loss tangent, 100Hz (when completely dry) | IEC 62631-2-1 | E-4 | 140 | - |
Dielectric loss tangent, 100Hz (when humidity controlled) | IEC 62631-2-1 | E-4 | 500 | - | |
Dielectric tangent, 1MHz (when completely dry) | IEC 62631-2-1 | E-4 | 140 | - | |
Dielectric tangent, 1MHz (when humidity controlled) | IEC 62631-2-1 | E-4 | 500 | - | |
Dielectric Strength Dielectric Strength/IEC 60243-1 | Withstand voltage (when completely dry) | IEC 60243-1 | ｋV/m ｍ | 40 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Optimum resin temperature | ℃ | 325 | - | |
Drying conditions Drying conditions/ | Drying temperature | ℃ | 100 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler Content | % | 45 | GF |
Copyright© 2025 PlaBase. All Rights Reserved.