Public Beta
Public Beta
| Manufacturer | Celanese Corporation |
| Resin Name | PA |
| Product Name | Zytel |
| ISO Material Code | PA-I-GF35 |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm^3 | 1.42 | - |
Water absorption Water absorption/ISO 62 | Balanced water absorption (2mm) | ISO 62 | % | 1.8 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75-1/-2 | Deflection temperature under load (1.80MPa) | ISO 75-1/-2 | ℃ | 262 | - |
Linear expansion coefficient (MD) Linear expansion coefficient (MD)/ISO 11359-1/-2 | Linear expansion coefficient (parallel) | ISO 11359-1/-2 | x10^-5/℃ | 2 | - |
Linear expansion coefficient (TD) Linear expansion coefficient (TD)/ISO 11359-1/-2 | Linear expansion coefficient (right angle) | ISO 11359-1/-2 | x10^-5/℃ | 6 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ISO 527-1/-2 | Breaking stress (when completely dry) | ISO 527-1/-2 | MPa | 187 | - |
Breaking stress (when humidified) | ISO 527-1/-2 | MPa | 170 | - | |
Tensile strain at break Tensile strain at break/ISO 527-1/-2 | Breaking strain (when completely dry) | ISO 527-1/-2 | % | 2.7 | - |
Breaking strain (when humidity controlled) | ISO 527-1/-2 | % | 2.4 | - | |
Tensile Modulus Tensile Modulus/ISO 527-1/-2 | Tensile modulus (when completely dry) | ISO 527-1/-2 | MPa | 10000 | - |
Tensile modulus (when conditioned) | ISO 527-1/-2 | MPa | 11000 | - | |
Charpy impact strength Charpy impact strength/ISO 179/1eA | Notched Charpy impact strength (23°C) (when completely dry) | ISO 179/1eA | kJ/m^2 | 11 | - |
Charpy impact strength (23℃) (when completely dry) | ISO 179/1eU | kJ/m^2 | 82 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/IEC 62631-3-1 | Volume resistivity (when completely dry) | IEC 62631-3-1 | Ω・cm | NaN | - |
Dielectric constant Dielectric constant/IEC 62631-2-1 | Dielectric constant, 100Hz (when completely dry) | IEC 62631-2-1 | 4.4 | - | |
Dielectric constant, 1MHz (when completely dry) | IEC 62631-2-1 | 4.1 | - | ||
Dielectric loss tangent Dielectric loss tangent/IEC 62631-2-1 | Dielectric loss tangent, 100Hz (when completely dry) | IEC 62631-2-1 | E-4 | 65 | - |
Dielectric tangent, 1MHz (when completely dry) | IEC 62631-2-1 | E-4 | 160 | - | |
Dielectric Strength Dielectric Strength/IEC 60243-1 | Withstand voltage (when completely dry) | IEC 60243-1 | ｋV/m ｍ | 32 | - |
Tracking resistance Tracking resistance/IEC 60112 | Tracking resistance (when completely dry) | IEC 60112 | 600 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Optimum resin temperature | ℃ | 325 | - | |
Drying conditions Drying conditions/ | Drying temperature | ℃ | 100 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler Content | % | 35 | GF |
Copyright© 2026 PlaBase. All Rights Reserved.