Public Beta
Public Beta
| Manufacturer | Techno UMG Co., Ltd. |
| Resin Name | ASA |
| Product Name | DIALAC |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | 1.07 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75 | Deflection Temperature under Load | ISO 75 | ℃ | 83 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Bending strength Bending strength/ISO 178 | Bending strength | ISO 178 | MPa | 73 | - |
Flexural modulus Flexural modulus/ISO 178 | Flexural Modulus | ISO 178 | MPa | 2350 | - |
Charpy impact strength Charpy impact strength/ISO 179 | Charpy impact strength | ISO 179 | kJ/m^2 | 10 | - |
Surface hardness Surface hardness/ISO 2039 | Rockwell hardness | ISO 2039 | R | 108 | - |
Tensile strength Tensile strength/ISO 527 | Tensile strength | ISO 527 | MPa | 47 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage Mold shrinkage/ISO 294-4 | Mold shrinkage | ISO 294-4 | % | - | |
ＭＶＲ ＭＶＲ/ISO 1133 | Melt volume rate (220℃, 98N) | ISO 1133 | cm3/10min | 25 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Cylinder Temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Pre-drying temperature | ℃ | 2～4hrs |
| Color |
|---|
All Color |
| Main Applications |
|---|
Vehicle exterior, outdoor use |
| Key Features |
|---|
Standard |
Copyright© 2025 PlaBase. All Rights Reserved.