Public Beta
Public Beta
| Manufacturer | Sojitz Technoplus Corporation |
| Resin Name | ABS |
| Product Name | Sojitz Technoplus Colored Pellet |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm3 | 1.05 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75 | Deflection temperature under load (1.82MPa) | ISO 75 | ℃ | 82 | - |
Linear expansion coefficient Linear expansion coefficient/ISO 11392 | Linear expansion coefficient | ISO 11392 | ×10^-5/℃ | 8 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO 527 | Tensile yield stress (23℃) | ISO 527 | MPa | 55 | - |
Tensile Modulus Tensile Modulus/ISO 527 | Tensile modulus (23℃) | ISO 527 | MPa | 2800 | - |
Bending strength Bending strength/ISO 178 | Bending strength (23℃) | ISO 178 | MPa | 88 | - |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus (23℃) | ISO 178 | MPa | 2950 | - |
Charpy impact strength Charpy impact strength/ISO 179 | Charpy impact strength (notched, 23℃) | ISO 179 | kJ/m^2 | 8 | - |
Charpy impact strength (notched, -30℃) | ISO 179 | kJ/m^2 | 3 | - | |
Surface hardness Surface hardness/ISO 2039 | Rockwell hardness (23℃) | ISO 2039 | R-Scale | 114 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage Mold shrinkage/ISO 294-4 | Mold shrinkage | ISO 294-4 | % | - | |
ＭＶＲ ＭＶＲ/ISO 1133 | Melt volume flow rate (220℃×98N) | ISO 1133 | cm3/10min | 16 | - |
| Key Features |
|---|
General high flow, high gloss grade, general purpose, high rigidity |
Copyright© 2025 PlaBase. All Rights Reserved.