Public Beta
Public Beta
| Manufacturer | Toray Industries, Inc. |
| Resin Name | PA66 |
| Product Name | Amilan |
| ISO Material Code | >PA66-GF15< |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density (23℃) | ISO 1183 | g/cm^3 | 1.26 | - |
Water absorption Water absorption/ISO 62 | Water absorption, in water (24hr, 23℃) | ISO 62 | % | 1 | - |
Water absorption, in water (saturated, 23℃) | ISO 62 | % | 7.2 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Specific heat Specific heat/- | Specific heat | - | J/kg/℃ | 2000 | - |
Deflection Temperature under Load Deflection Temperature under Load/ISO 75-2/A | Deflection temperature under load (1.8MPa, no annealing) | ISO 75-2/A | ℃ | 245 | - |
Linear expansion coefficient Linear expansion coefficient/ISO 11359-2 | Coefficient of linear thermal expansion | ISO 11359-2 | ×10^-5/℃ | 4 | - |
Thermal Conductivity Thermal Conductivity/- | Thermal Conductivity | - | W/m・℃ | 0.36 | - |
Melting point Melting point/DSC method | Dissolving temperature | DSC method | ℃ | 265 | - |
Flammability Flammability/UL 94 | Flammability Rating | UL 94 | NaN | 0.75mm |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile strain at break Tensile strain at break/ISO 527-2 | Tensile strain (break point, -40℃) | ISO 527-2 | % | 2 | - |
Tensile strain (break point, 23℃) | ISO 527-2 | % | 2 | - | |
Tensile strain (break point, 80℃) | ISO 527-2 | % | 7.5 | - | |
Bending strength Bending strength/ISO 178 | Bending strength (-40℃) | ISO 178 | MPa | 225 | - |
Bending strength (23℃) | ISO 178 | MPa | 180 | - | |
Bending strength (80℃) | ISO 178 | MPa | 115 | - | |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus (-40℃) | ISO 178 | MPa | 6600 | - |
Flexural modulus (23℃) | ISO 178 | MPa | 5800 | - | |
Flexural modulus (80℃) | ISO 178 | MPa | 2800 | - | |
Charpy impact strength Charpy impact strength/ISO 179 | Charpy impact strength (notched, 23℃) | ISO 179 | kJ/m^2 | 6 | - |
Charpy impact strength (unnotched, 23℃) | ISO 179 | kJ/m^2 | 30 | - | |
Surface hardness Surface hardness/ISO 2039-2 | Rockwell hardness (R scale, 23℃) | ISO 2039-2 | 120 | - | |
Rockwell hardness (M scale, 23℃) | ISO 2039-2 | 95 | - | ||
Tensile strength Tensile strength/ISO 527-2 | Tensile strength (-40℃) | ISO 527-2 | MPa | 155 | - |
Tensile strength (23℃) | ISO 527-2 | MPa | 110 | - | |
Tensile strength (80℃) | ISO 527-2 | MPa | 65 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/IEC 60093 | Volume resistivity | IEC 60093 | Ω・cm | NaN | - |
Dielectric constant Dielectric constant/IEC 60250 | Dielectric constant (23℃, 50Hz) | IEC 60250 | 4.3 | - | |
Dielectric constant (23℃, 1kHz) | IEC 60250 | 4.1 | - | ||
Dielectric constant (23℃, 1MHz) | IEC 60250 | 3.6 | - | ||
Dielectric loss tangent Dielectric loss tangent/IEC 60250 | Dielectric tangent (23℃,50Hz) | IEC 60250 | 0.04 | - | |
Dielectric tangent (23℃, 1kHz) | IEC 60250 | 0.04 | - | ||
Dielectric tangent (23℃, 1MHz) | IEC 60250 | 0.04 | - | ||
Dielectric Strength Dielectric Strength/IEC 60243-1 | Withstand voltage | IEC 60243-1 | kV/mm | 20 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/Toray method | Mold shrinkage, parallel: 3.00mm (80×80×3mm) | Toray method | % | - | |
Mold shrinkage rate TD Mold shrinkage rate TD/Toray method | Molding shrinkage, vertical: 3.00mm (80×80×3mm) | Toray method | % | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler Content | % | 15 | GF |
| Main Applications |
|---|
Office Automation Equipment, Gears, Sporting Goods, Equipment Parts, Construction Applications, Tools/Other Parts, Automotive Applications, Large & Small Appliances, Electrical/Electronic Equipment |
| Key Features |
|---|
Enhanced, Standard, GF15% |
Copyright© 2026 PlaBase. All Rights Reserved.