Public Beta
Public Beta
| Manufacturer | Toray Industries, Inc. |
| Resin Name | LCP |
| Product Name | Siveras |
| ISO Material Code | >LCP-MD30< |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ASTM D792 | Density/Specific Gravity | ASTM D792 | g/cm^3 | 1.64 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ASTM D648 | Deflection temperature under load (1.8MPa, no annealing) | ASTM D648 | ℃ | 230 | - |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ASTM D696 | Linear expansion coefficient, parallel | ASTM D696 | ×10^-5/℃ | 0.5 | - |
Linear expansion coefficient (right angle) Linear expansion coefficient (right angle)/ASTM D696 | Linear expansion coefficient, vertical | ASTM D696 | ×10^-5/℃ | 1.5 | - |
Linear expansion coefficient Linear expansion coefficient/ASTMD696 | Coefficient of linear thermal expansion | ASTMD696 | ×10＾-5/K | - | |
Flammability Flammability/UL 94 | Flammability Rating | UL 94 | NaN | 0.75mm,BK |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile strain at break Tensile strain at break/ASTM D638 | Tensile elongation (break point) | ASTM D638 | % | 3.5 | - |
Bending strength Bending strength/ASTM D790 | Bending strength | ASTM D790 | MPa | 150 | - |
Flexural modulus Flexural modulus/ASTM D790 | Flexural modulus (23℃) | ASTM D790 | MPa | 14500 | - |
Izod impact strength Izod impact strength/ASTM D256 | Notched Izod impact | ASTM D256 | J/m | 50 | - |
Tensile strength Tensile strength/ASTM D638 | Tensile strength | ASTM D638 | MPa | 135 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/Toray method | Mold shrinkage, parallel: 1.00mm (80×80×1mm) | Toray method | % | 0.05 | - |
Mold shrinkage rate TD Mold shrinkage rate TD/Toray method | Molding shrinkage, vertical: 1.00mm (80×80×1mm) | Toray method | % | 0.21 | - |
| Main Applications |
|---|
Connectors, Computer Components, Mobile Phones, Electrical/Electronic Equipment |
| Key Features |
|---|
Inorganic filler reinforcement, high toughness, low gas, low warpage, good flow |
Copyright© 2026 PlaBase. All Rights Reserved.