Public Beta
Public Beta
| Manufacturer | Solvay Specialty Polymers Japan Co., Ltd. |
| Resin Name | PA |
| Product Name | Ixef |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO1183 | Density | ISO1183 | g/cm＾3 | 1.64 | - |
Water absorption Water absorption/ISO62 | Water absorption rate (23℃, 24hr) | ISO62 | % | 0.16 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO75-2/A | Deflection temperature under load (1.8MPa, no annealing treatment) | ISO75-2/A | ℃ | 230 | - |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ISO11359-2 | Linear expansion coefficient (flow) | ISO11359-2 | ×10＾-5/℃ | 1.5 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ISO527-2 | Tensile breaking stress | ISO527-2 | MPa | 280 | - |
Tensile strain at break Tensile strain at break/ISO527-2 | Tensile strain at break | ISO527-2 | % | 1.9 | - |
Tensile Modulus Tensile Modulus/ISO527-2 | Tensile Modulus | ISO527-2 | MPa | 19500 | - |
Bending strength Bending strength/ISO178 | Bending stress | ISO178 | MPa | 380 | - |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus | ISO178 | MPa | 18500 | - |
Izod impact strength Izod impact strength/ASTMD256 | Izod impact strength (unnotched) | ASTMD256 | J/m | 850 | - |
Izod impact strength (notched) | ASTMD256 | J/m | 110 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage Mold shrinkage/ISO294-4 | Mold shrinkage | ISO294-4 | % | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying conditions | ℃ | 120 | 0.50-1.5hr |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler content (GF) | % | 50 | - |
| Color |
|---|
Black, Tone, Gray, Natural |
| Main Applications |
|---|
Dental Application,High Gloss Products,Hospital Supplies,Medical Equipment,Healthcare,Surgical Instruments |
| Key Features |
|---|
PARA, biocompatible, chemical resistant, creep resistant, electron beam sterilizable, ethylene oxide sterilizable, general purpose, good dimensional stability, sterilizable, high flow, high strength, low moisture absorption, good appearance, radiation resistant, radiation sterilizable, radiolucent, ultra-tough |
Copyright© 2026 PlaBase. All Rights Reserved.