Public Beta
Public Beta
| Manufacturer | Solvay Specialty Polymers Japan Co., Ltd. |
| Resin Name | PPA |
| Product Name | Amodel |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO1183/A | Density | ISO1183/A | g/cm＾3 | 1.68 | - |
Water absorption Water absorption/ASTMD570 | Water absorption rate (24hr) | ASTMD570 | % | 0.2 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO75-2/Af | Deflection temperature under load (1.8MPa, no annealing treatment) | ISO75-2/Af | ℃ | 282 | - |
Deflection temperature under load (1.8MPa, annealed) | ASTMD648 | ℃ | 277 | - | |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ASTME831 | Linear expansion coefficient (flow, 0 to 100℃) | ASTME831 | ×10＾-5/℃ | 1.7 | - |
Linear expansion coefficient (flow, 100 to 200℃) | ASTME831 | ×10＾-5/℃ | 0.7 | - | |
Linear expansion coefficient (right angle) Linear expansion coefficient (right angle)/ASTME831 | Linear expansion coefficient (right angle, 0 to 100℃) | ASTME831 | ×10＾-5/℃ | 6.4 | - |
Linear expansion coefficient (right angle, 100 to 200℃) | ASTME831 | ×10＾-5/℃ | 11 | - | |
Melting point Melting point/ISO11357-3 | Melting point | ISO11357-3 | ℃ | 310 | - |
Melting point | ASTMD3418 | ℃ | 310 | - | |
Flammability Flammability/UL94 | Flammability | UL94 | NaN | 0.8mm |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO527-2 | Tensile yield stress (23℃) | ISO527-2 | MPa | 186 | - |
Tensile yield stress (100℃) | ISO527-2 | MPa | 114 | - | |
Tensile yield stress (150℃) | ISO527-2 | MPa | 75.2 | - | |
Tensile yield stress (175℃) | ISO527-2 | MPa | 63.4 | - | |
Tensile strain at break Tensile strain at break/ISO527-2 | Tensile elongation at break (23℃) | ISO527-2 | % | 1.6 | - |
Tensile elongation at break (100℃) | ISO527-2 | % | 2.4 | - | |
Tensile elongation at break (150℃) | ISO527-2 | % | 5.1 | - | |
Tensile elongation at break (175℃) | ISO527-2 | % | 4.9 | - | |
Tensile elongation at break | ASTMD638 | % | 1.7 | - | |
Tensile Modulus Tensile Modulus/ISO527-2 | Tensile modulus (23℃) | ISO527-2 | MPa | 14500 | - |
Tensile modulus (100℃) | ISO527-2 | MPa | 9170 | - | |
Tensile modulus (150℃) | ISO527-2 | MPa | 5930 | - | |
Tensile modulus (175℃) | ISO527-2 | MPa | 5100 | - | |
Tensile Modulus | ASTMD638 | MPa | 16100 | - | |
Bending strength Bending strength/ISO178 | Bending strength (23℃) | ISO178 | MPa | 259 | - |
Bending strength (100℃) | ISO178 | MPa | 161 | - | |
Bending strength (150℃) | ISO178 | MPa | 101 | - | |
Bending strength (175℃) | ISO178 | MPa | 87.6 | - | |
Bending strength | ASTMD790 | MPa | 224 | - | |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus (23℃) | ISO178 | MPa | 12600 | - |
Flexural modulus (100℃) | ISO178 | MPa | 8070 | - | |
Flexural modulus (150℃) | ISO178 | MPa | 4960 | - | |
Flexural modulus (175℃) | ISO178 | MPa | 4620 | - | |
Flexural modulus | ASTMD790 | MPa | 13100 | - | |
Charpy impact strength Charpy impact strength/ISO179/1eU | Charpy impact strength (unnotched, 23℃) | ISO179/1eU | kJ/m＾2 | 46 | - |
Charpy impact strength (notched, 23℃) | ISO179/1eA | kJ/m＾2 | 14 | - | |
Izod impact strength Izod impact strength/ISO180/1U | Izod impact strength (unnotched, 23℃) | ISO180/1U | kJ/m＾2 | 44 | - |
Izod impact strength (notched, 23℃) | ISO180/1A | kJ/m＾2 | 8.2 | - | |
Izod impact strength (unnotched) | ASTMD256 | J/m | 690 | - | |
Izod impact strength (notched) | ASTMD256 | J/m | 85 | - | |
Tensile strength Tensile strength/ASTMD638 | Tensile stress | ASTMD638 | MPa | 199 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/ASTMD257 | Volume resistivity | ASTMD257 | Ω・cm | NaN | - |
Surface resistance Surface resistance/ASTMD257 | Surface resistance | ASTMD257 | Ω | NaN | - |
Dielectric constant Dielectric constant/ASTMD150 | Dielectric constant (100Hz) | ASTMD150 | 4.4 | - | |
Dielectric constant (1MHz) | ASTMD150 | 4.1 | - | ||
Dielectric loss tangent Dielectric loss tangent/ASTMD150 | Dielectric tangent (1MHz) | ASTMD150 | 0.011 | - | |
Dielectric Strength Dielectric Strength/ASTMD149 | Dielectric strength (3.18mm) | ASTMD149 | kV/mm | 24 | - |
Tracking resistance Tracking resistance/UL746 | Tracking resistance | UL746 | PLC1 |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ASTMD955 | Mold shrinkage rate MD | ASTMD955 | % | 0.3 | - |
Mold shrinkage rate TD Mold shrinkage rate TD/ASTMD955 | Mold shrinkage rate TD | ASTMD955 | % | 0.6 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying conditions | ℃ | 120 | 4.0hr,< |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler content (GF) | % | 33 | - |
| Color |
|---|
Black |
| Main Applications |
|---|
Automotive, Automotive Electronics, Bobbins, Connectors, Electrical/Electronic |
| Key Features |
|---|
Chemical resistance, flame retardancy, good dimensional stability, electrical properties, high rigidity, high fluidity, high strength, hot water moldability |
Copyright© 2026 PlaBase. All Rights Reserved.