Public Beta
Public Beta
| Manufacturer | Solvay Specialty Polymers Japan Co., Ltd. |
| Resin Name | PAEK |
| Product Name | AvaSpire |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ASTMD792 | Proportion | ASTMD792 | 1.29 | - | |
Water absorption Water absorption/ASTMD570 | Water absorption rate (24hr) | ASTMD570 | % | 0.2 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Specific heat Specific heat/DSC | Specific heat (50℃) | DSC | J/㎏・℃ | 1450 | - |
Specific heat (200℃) | DSC | J/㎏・℃ | 2000 | - | |
Deflection Temperature under Load Deflection Temperature under Load/ASTMD648 | Deflection temperature under load (1.8MPa, no annealing, 3.20mm, 2 hours at 200℃) | ASTMD648 | ℃ | 187 | - |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ASTME831 | Linear expansion coefficient (flow, -50 to 50℃) | ASTME831 | 10＾-5/℃ | 4.7 | - |
Thermal Conductivity Thermal Conductivity/ASTME1530 | Thermal Conductivity | ASTME1530 | W/m・℃ | 0.2 | - |
Melting point Melting point/ASTMD3418 | Melting point | ASTMD3418 | ℃ | 340 | - |
Flammability Flammability/UL94 | Flammability | UL94 | NaN | 0.8mm | |
Flammability | UL94 | NaN | 1.6mm | ||
Glass transition temperature Glass transition temperature/ASTMD3418 | Glass transition temperature | ASTMD3418 | ℃ | 158 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO527-2/1A/50 | Tensile Yield Stress | ISO527-2/1A/50 | MPa | 87 | - |
Tensile strain at break Tensile strain at break/ISO527-2/1A/50 | Tensile elongation at break | ISO527-2/1A/50 | % | 40 | - |
Tensile elongation at break (51mm/min) | ASTMD638 | % | 40 | - | |
Tensile Modulus Tensile Modulus/ISO527-2/1A/1 | Tensile Modulus | ISO527-2/1A/1 | MPa | 3100 | - |
Tensile modulus (50mm/min) | ASTMD638 | MPa | 2900 | - | |
Bending strength Bending strength/ISO178 | Bending strength | ISO178 | MPa | 106 | - |
Bending strength | ASTMD790 | MPa | 122 | - | |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus | ISO178 | MPa | 3000 | - |
Flexural modulus | ASTMD790 | MPa | 3100 | - | |
Izod impact strength Izod impact strength/ISO180 | Izod impact strength (unnotched) | ISO180 | kJ/m＾2 | No Break | |
Izod impact strength (notched) | ISO180 | kJ/m＾2 | 7.6 | - | |
Izod impact strength (unnotched) | ASTMD4812 | J/m | No Break | ||
Izod impact strength (notched) | ASTMD256 | J/m | 100 | - | |
Surface hardness Surface hardness/ASTMD785 | Rockwell Hardness | ASTMD785 | M | 93 | - |
Tensile strength Tensile strength/ASTMD638 | Tensile stress (50mm/min) | ASTMD638 | MPa | 84 | - |
Tensile elongation Tensile elongation/ISO527-2/50 | Tensile Yield Elongation | ISO527-2/50 | % | 5.7 | - |
Tensile yield elongation (51mm/min) | ASTMD638 | % | 6 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/ASTMD257 | Volume resistivity | ASTMD257 | Ω・cm | NaN | - |
Surface resistance Surface resistance/ASTMD257 | Surface resistance | ASTMD257 | Ω | NaN | - |
Dielectric constant Dielectric constant/ASTMD150 | Dielectric constant (60Hz) | ASTMD150 | 3.07 | - | |
Dielectric constant (1kHz) | ASTMD150 | 3.12 | - | ||
Dielectric constant (1MHz) | ASTMD150 | 3.1 | - | ||
Dielectric loss tangent Dielectric loss tangent/IEC60250 | Dielectric tangent (60Hz) | IEC60250 | 0.001 | - | |
Dielectric tangent (1kHz) | IEC60250 | 0.001 | - | ||
Dielectric tangent (1MHz) | IEC60250 | 0.004 | - | ||
Dielectric Strength Dielectric Strength/ASTMD149 | Dielectric strength (0.0500mm, amorphous film) | ASTMD149 | kV/mm | 190 | - |
Dielectric strength (3.00mm) | ASTMD149 | kV/mm | 17 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ASTMD955 | Mold shrinkage rate MD(3.18mm) | ASTMD955 | % | - | |
Mold shrinkage rate TD Mold shrinkage rate TD/ASTMD955 | Mold shrinkage TD (3.18mm) | ASTMD955 | % | - | |
MFR MFR/ASTMD1238 | MFR(400℃,2.16kg) | ASTMD1238 | g/10min | 5 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying conditions | ℃ | 150 | 4.0hr |
| Color |
|---|
Beige |
| Main Applications |
|---|
Bearings, Bushings, Connectors, Medical & Health, Oil & Gas, Semiconductor Molding Materials |
| Key Features |
|---|
Chemical resistance, ductility, fatigue resistance, flame resistance, good dimensional stability, impact resistance, high heat resistance |
Copyright© 2025 PlaBase. All Rights Reserved.