Public Beta
Public Beta
| Manufacturer | Solvay Specialty Polymers Japan Co., Ltd. |
| Resin Name | PPA |
| Product Name | Amodel |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO1183/A | Density | ISO1183/A | g/cm＾3 | 1.67 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO75-2/Af | Deflection temperature under load (1.8MPa, no annealing treatment) | ISO75-2/Af | ℃ | 300 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ISO527-2 | Tensile breaking stress (23℃) | ISO527-2 | MPa | 270 | - |
Tensile strain at break Tensile strain at break/ISO527-2 | Tensile strain at break (23℃) | ISO527-2 | % | 2 | - |
Tensile Modulus Tensile Modulus/ISO527-2 | Tensile Modulus | ISO527-2 | MPa | 19100 | - |
Bending strength Bending strength/ISO178 | Bending stress | ISO178 | MPa | 400 | - |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus (23℃) | ISO178 | MPa | 18400 | - |
Charpy impact strength Charpy impact strength/ISO179 | Charpy impact strength (unnotched) | ISO179 | kJ/m＾2 | 88 | - |
Charpy impact strength (notched) | ISO179 | kJ/m＾2 | 12 | - | |
Yield Strain Yield Strain/ISO178 | Bending strain (23℃) | ISO178 | % | 2.4 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ASTMD955 | Mold shrinkage MD (1.00mm, pressure = 750 bar) | ASTMD955 | % | 0.14 | - |
Mold shrinkage MD (1.00mm, pressure = 500 bar) | ASTMD955 | % | 0.16 | - | |
Mold shrinkage MD (2.00mm, pressure = 750 bar) | ASTMD955 | % | 0.18 | - | |
Mold shrinkage rate MD (2.00mm, pressure = 500bar) | ASTMD955 | % | 0.15 | - | |
Mold shrinkage rate TD Mold shrinkage rate TD/ASTMD955 | Mold shrinkage TD (1.00mm, pressure = 750 bar) | ASTMD955 | % | 0.42 | - |
Mold shrinkage TD (1.00mm, pressure = 500 bar) | ASTMD955 | % | 0.46 | - | |
Mold shrinkage TD (2.00mm, pressure = 750 bar) | ASTMD955 | % | 0.43 | - | |
Mold shrinkage TD (2.00mm, pressure = 500 bar) | ASTMD955 | % | 0.42 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | 160 | - | |
Drying conditions Drying conditions/ | Drying conditions | ℃ | 120 | 4.0hr |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler content (GF) | % | 50 | - |
| Color |
|---|
Black, Natural |
| Main Applications |
|---|
Home appliances, housings, non-specific food applications, piping parts, pump parts |
| Key Features |
|---|
Chemical resistance, chlorine resistance, creep resistance, good dimensional stability, high rigidity, high strength, high temperature strength, low moisture absorption |
Copyright© 2025 PlaBase. All Rights Reserved.