Public Beta
Public Beta
| Manufacturer | Solvay Specialty Polymers Japan Co., Ltd. |
| Resin Name | PPA |
| Product Name | Amodel |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO1183/A | Density | ISO1183/A | g/cm＾3 | 1.46 | - |
Water absorption Water absorption/ASTMD570 | Water absorption rate (24hr) | ASTMD570 | % | 0.28 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO75-2/Af | Deflection temperature under load (1.8MPa, no annealing treatment) | ISO75-2/Af | ℃ | 300 | - |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ASTME831 | Linear expansion coefficient (flow, 0 to 90℃) | ASTME831 | ×10＾-5/℃ | 2 | - |
Linear expansion coefficient (flow, 120 to 200℃) | ASTME831 | ×10＾-5/℃ | 1.2 | - | |
Linear expansion coefficient (right angle) Linear expansion coefficient (right angle)/ASTME831 | Linear expansion coefficient (right angle, 0 to 90℃) | ASTME831 | ×10＾-5/℃ | 8 | - |
Linear expansion coefficient (right angle, 120 to 200℃) | ASTME831 | ×10＾-5/℃ | 13 | - | |
Flammability Flammability/UL94 | Flammability | UL94 | NaN | 0.40mm,Black,Natural |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO527-2 | Tensile Yield Stress | ISO527-2 | MPa | - | |
Tensile strain at break Tensile strain at break/ISO527-2 | Tensile strain at break | ISO527-2 | % | - | |
Tensile Modulus Tensile Modulus/ISO527-2 | Tensile Modulus | ISO527-2 | MPa | 12000 | - |
Bending strength Bending strength/ISO178 | Bending stress | ISO178 | MPa | - | |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus | ISO178 | MPa | 10800 | - |
Izod impact strength Izod impact strength/ISO180/1U | Izod impact strength (unnotched) | ISO180/1U | kJ/m＾2 | - | |
Izod impact strength (notched) | ISO180/1A | kJ/m＾2 | - | ||
Surface hardness Surface hardness/ASTMD785 | Rockwell Hardness | ASTMD785 | R | 121 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/ASTMD257 | Volume resistivity | ASTMD257 | Ω・cm | NaN | - |
Dielectric constant Dielectric constant/ASTMD150 | Dielectric constant (100Hz) | ASTMD150 | 3.78 | - | |
Dielectric constant (1MHz) | ASTMD150 | 3.53 | - | ||
Dielectric loss tangent Dielectric loss tangent/ASTMD150 | Dielectric loss tangent (100Hz) | ASTMD150 | 0.005 | - | |
Dielectric tangent (1MHz) | ASTMD150 | 0.012 | - | ||
Dielectric Strength Dielectric Strength/ASTMD149 | Dielectric strength (0.800mm) | ASTMD149 | kV/mm | 30 | - |
Dielectric strength (1.60mm) | ASTMD149 | kV/mm | 26 | - | |
Tracking resistance Tracking resistance/UL746 | Tracking resistance | UL746 | PLC0 |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ISO294-4 | Mold shrinkage rate MD | ISO294-4 | % | 0.32 | - |
Mold shrinkage rate TD Mold shrinkage rate TD/ISO294-4 | Mold shrinkage rate TD | ISO294-4 | % | 1.3 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying conditions | ℃ | 120 | 4.0hr |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler content (GF) | % | 33 | - |
| Color |
|---|
Black, Natural |
| Main Applications |
|---|
Connectors, Electrical/Electronic |
| Key Features |
|---|
Chemical resistance, creep resistance, fast molding cycle, flame retardant, good dimensional stability, electrical properties, high rigidity, halogen-free, high strength, hot water moldability |
Copyright© 2025 PlaBase. All Rights Reserved.