Public Beta
Public Beta
| Manufacturer | Solvay Specialty Polymers Japan Co., Ltd. |
| Resin Name | PPA |
| Product Name | Amodel |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO1183/A | Density | ISO1183/A | g/cm＾3 | 1.46 | - |
Water absorption Water absorption/ASTMD570 | Water absorption rate (24hr) | ASTMD570 | % | 0.26 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO75-2/A | Deflection temperature under load (1.8MPa, no annealing treatment) | ISO75-2/A | ℃ | 310 | - |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ASTME831 | Linear expansion coefficient (flow, 0 to 90℃) | ASTME831 | ×10＾-5/℃ | 2 | - |
Linear expansion coefficient (flow, 150 to 250℃) | ASTME831 | ×10＾-5/℃ | 1.4 | - | |
Linear expansion coefficient (right angle) Linear expansion coefficient (right angle)/ASTME831 | Linear expansion coefficient (right angle, 0 to 90℃) | ASTME831 | ×10＾-5/℃ | 6.3 | - |
Linear expansion coefficient (right angle, 150 to 250℃) | ASTME831 | ×10＾-5/℃ | 15 | - | |
Melting point Melting point/ISO3146 | Melting point | ISO3146 | ℃ | 327 | - |
Flammability Flammability/UL94 | Flammability | UL94 | NaN | 0.8mm |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ISO527-2 | Tensile breaking stress | ISO527-2 | MPa | 180 | - |
Tensile strain at break Tensile strain at break/ISO527-2 | Tensile strain at break | ISO527-2 | % | 1.8 | - |
Tensile Modulus Tensile Modulus/ISO527-2 | Tensile Modulus | ISO527-2 | MPa | 12000 | - |
Bending strength Bending strength/ISO178 | Bending stress | ISO178 | MPa | 255 | - |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus | ISO178 | MPa | 11000 | - |
Charpy impact strength Charpy impact strength/ISO179/1eA | Charpy impact strength (notched) | ISO179/1eA | kJ/m＾2 | 8.2 | - |
Izod impact strength Izod impact strength/ISO180/1U | Izod impact strength (unnotched) | ISO180/1U | kJ/m＾2 | 40 | - |
Izod impact strength (notched) | ISO180/1A | kJ/m＾2 | 8.4 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/ASTMD257 | Volume resistivity | ASTMD257 | Ω・cm | NaN | - |
Surface resistance Surface resistance/ASTMD257 | Surface resistance | ASTMD257 | Ω | NaN | - |
Dielectric constant Dielectric constant/ASTMD150 | Dielectric constant (60Hz) | ASTMD150 | 3.9 | - | |
Dielectric constant (1MHz) | ASTMD150 | 3.7 | - | ||
Dielectric loss tangent Dielectric loss tangent/ASTMD150 | Dielectric tangent (60Hz) | ASTMD150 | 0.006 | - | |
Dielectric tangent (1MHz) | ASTMD150 | 0.016 | - | ||
Dielectric Strength Dielectric Strength/ASTMD149 | Dielectric Strength | ASTMD149 | kV/mm | 19 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ASTMD955 | Mold shrinkage rate MD | ASTMD955 | % | 0.5 | - |
Mold shrinkage rate TD Mold shrinkage rate TD/ASTMD955 | Mold shrinkage rate TD | ASTMD955 | % | 1 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying conditions | ℃ | 120 | 4.0hr |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler content (GF) | % | 33 | - |
| Color |
|---|
Black, Natural |
| Main Applications |
|---|
Automotive, Auto Electronics, Auto Parts, Bobbins, Cameras, Mobile Phones, Connectors, Electrical/Electronic, General Purpose, Industrial Purpose, Industrial Parts, Lawn Mowers, Machinery/Machine Parts, Metal Substitutes |
| Key Features |
|---|
Chemical resistance, creep resistance, high speed molding cycle, good dimensional stability, high rigidity, high flowability, high rigidity, high strength, hot water moldability, low moisture absorption, lubrication |
Copyright© 2026 PlaBase. All Rights Reserved.