Public Beta
Public Beta
| Manufacturer | Solvay Specialty Polymers Japan Co., Ltd. |
| Resin Name | PAEK |
| Product Name | AvaSpire |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ASTMD792 | Proportion | ASTMD792 | 1.65 | - | |
Water absorption Water absorption/ASTMD570 | Water absorption rate (24hr) | ASTMD570 | % | 0.1 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Specific heat Specific heat/DSC | Specific heat (50℃) | DSC | J/㎏・℃ | 1260 | - |
Specific heat (200℃) | DSC | J/㎏・℃ | 1620 | - | |
Deflection Temperature under Load Deflection Temperature under Load/ASTMD648 | Deflection temperature under load (1.8MPa, no annealing treatment) | ASTMD648 | ℃ | 285 | - |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ASTME831 | Linear expansion coefficient (flow, -50 to 50℃) | ASTME831 | 10＾-5/℃ | 1.5 | - |
Thermal Conductivity Thermal Conductivity/ASTME1530 | Thermal Conductivity | ASTME1530 | W/m・℃ | 0.31 | - |
Melting point Melting point/ASTMD3418 | Melting point | ASTMD3418 | ℃ | 345 | - |
Flammability Flammability/UL94 | Flammability | UL94 | NaN | 0.8mm | |
Flammability | UL94 | NaN | 1.6mm | ||
Glass transition temperature Glass transition temperature/ASTMD3418 | Glass transition temperature | ASTMD3418 | ℃ | 150 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO527-2/1A/5 | Tensile yield stress (5.00mm) | ISO527-2/1A/5 | MPa | 188 | - |
Tensile strain at break Tensile strain at break/ISO527-2/1A/5 | Tensile elongation at break | ISO527-2/1A/5 | % | 1.8 | - |
Tensile elongation at break (5.0mm/min) | ASTM638 | % | 1.8 | - | |
Tensile Modulus Tensile Modulus/ISO527-2/1A/1 | Tensile Modulus | ISO527-2/1A/1 | MPa | 16700 | - |
Tensile modulus (5.0mm/min) | ASTMD638 | MPa | 15100 | - | |
Bending strength Bending strength/ISO178 | Bending strength | ISO178 | MPa | 250 | - |
Bending strength (23℃) | ASTMD790 | MPa | 253 | - | |
Bending strength (250℃) | ASTMD790 | MPa | 54 | - | |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus | ISO178 | MPa | 15400 | - |
Flexural modulus | ASTMD790 | MPa | 14800 | - | |
Izod impact strength Izod impact strength/ISO180 | Izod impact strength (unnotched) | ISO180 | kJ/m＾2 | 41 | - |
Izod impact strength (notched) | ISO180 | kJ/m＾2 | 8.5 | - | |
Izod impact strength (unnotched) | ASTMD4812 | J/m | 590 | - | |
Izod impact strength (notched) | ASTMD256 | J/m | 53 | - | |
Surface hardness Surface hardness/ASTMD785 | Rockwell Hardness | ASTMD785 | M | 105 | - |
Tensile strength Tensile strength/ASTMD638 | Tensile stress (50mm/min) | ASTMD638 | MPa | 191 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/ASTMD257 | Volume resistivity | ASTMD257 | Ω・cm | NaN | - |
Surface resistance Surface resistance/ASTMD257 | Surface resistance | ASTMD257 | Ω | NaN | - |
Dielectric constant Dielectric constant/ASTMD150 | Dielectric constant (60Hz) | ASTMD150 | 3.68 | - | |
Dielectric constant (1kHz) | ASTMD150 | 3.69 | - | ||
Dielectric constant (1MHz) | ASTMD150 | 3.66 | - | ||
Dielectric loss tangent Dielectric loss tangent/ASTMD150 | Dielectric tangent (60Hz) | ASTMD150 | 0.002 | - | |
Dielectric tangent (1kHz) | ASTMD150 | 0.001 | - | ||
Dielectric tangent (1MHz) | ASTMD150 | 0.003 | - | ||
Dielectric Strength Dielectric Strength/ASTMD149 | Dielectric Strength | ASTMD149 | kV/mm | 19 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ASTMD955 | Mold shrinkage rate MD(3.18mm) | ASTMD955 | % | - | |
Mold shrinkage rate TD Mold shrinkage rate TD/ASTMD955 | Mold shrinkage TD (3.18mm) | ASTMD955 | % | - | |
MFR MFR/ASTMD1238 | MFR(380℃,2.16kg) | ASTMD1238 | g/10min | 7 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying conditions | ℃ | 2.5-4.0hr |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler content (GF) | % | 40 | - |
| Color |
|---|
Natural Color |
| Main Applications |
|---|
Aircraft, Electrical/Electronics, Metal Replacement, Seals |
| Key Features |
|---|
Chemical resistance, flame resistance, good dimensional stability, high heat resistance, high rigidity, high strength |
Copyright© 2025 PlaBase. All Rights Reserved.