Public Beta
Public Beta
| Manufacturer | Solvay Specialty Polymers Japan Co., Ltd. |
| Resin Name | PPS Alloy |
| Product Name | Ryton |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ASTMD792 | Proportion | ASTMD792 | 1.51 | - | |
Water absorption Water absorption/ASTMD570 | Water absorption (24hr, 23℃) | ASTMD570 | % | 0.05 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ASTMD648 | Deflection temperature under load (1.8MPa, no annealing treatment) | ASTMD648 | ℃ | 250 | - |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ASTME831 | Linear expansion coefficient (flow, -50 to 50℃) | ASTME831 | ×10＾-5/℃ | 2 | - |
Linear expansion coefficient (flow, 100 to 200℃) | ASTME831 | ×10＾-5/℃ | 1 | - | |
Linear expansion coefficient (right angle) Linear expansion coefficient (right angle)/ASTME831 | Linear expansion coefficient (right angle, -50 to 50℃) | ASTME831 | ×10＾-5/℃ | 5.5 | - |
Thermal Conductivity Thermal Conductivity/ | Thermal Conductivity | W/m・℃ | 0.27 | - | |
Flammability Flammability/UL94 | Flammability | UL94 | NaN | 1.6mm |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile strain at break Tensile strain at break/ISO527-2 | Tensile elongation at break | ISO527-2 | % | 2 | - |
Tensile elongation at break | ASTMD638 | % | 2 | - | |
Bending strength Bending strength/ISO178 | Bending strength | ISO178 | MPa | 200 | - |
Bending strength | ASTMD790 | MPa | 193 | - | |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus | ISO178 | MPa | 9000 | - |
Flexural modulus | ASTMD790 | MPa | 8960 | - | |
Izod impact strength Izod impact strength/ISO180 | Izod impact strength (unnotched) | ISO180 | kJ/m^2 | 45 | - |
Izod impact strength (notched) | ISO180/A | kJ/m^2 | 9.5 | - | |
Izod impact strength (unnotched, 3.18 mm) | ASTMD4812 | J/m | 690 | - | |
Izod impact strength (notched, 3.18 mm) | ASTMD256 | J/m | 96 | - | |
Surface hardness Surface hardness/ASTMD785 | Rockwell hardness (M scale) | ASTMD785 | M | 86 | - |
Rockwell hardness (R scale) | ASTMD785 | R | 110 | - | |
Tensile strength Tensile strength/ISO527-2 | Tensile strength | ISO527-2 | MPa | 135 | - |
Tensile strength | ASTMD638 | MPa | 131 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/ASTMD257 | Volume resistivity | ASTMD257 | Ω・cm | NaN | - |
Surface resistance Surface resistance/ASTMD257 | Surface resistance | ASTMD257 | Ω | NaN | - |
Dielectric constant Dielectric constant/ASTMD150 | Dielectric constant (25℃, 1kHz) | ASTMD150 | 3.8 | - | |
Dielectric constant (25℃, 1MHz) | ASTMD150 | 3.7 | - | ||
Dielectric loss tangent Dielectric loss tangent/ASTMD150 | Dielectric tangent (25℃, 1kHz) | ASTMD150 | 0.003 | - | |
Dielectric tangent (25℃, 1MHz) | ASTMD150 | 0.009 | - | ||
Dielectric Strength Dielectric Strength/ASTMD149 | Dielectric Strength | ASTMD149 | kV/mm | 22 | - |
Arc Resistance Arc Resistance/ASTMD495 | Arc Resistance | ASTMD495 | sec | 124 | - |
Anti-tracking Anti-tracking/UL746 | Anti-tracking | UL746 | V | 100 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ | Mold shrinkage rate MD(3.20mm) | % | 0.2 | - | |
Mold shrinkage rate TD Mold shrinkage rate TD/ | Mold shrinkage TD (3.20mm) | % | 0.6 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler content (GF) | % | 30 | - |
| Color |
|---|
Black |
| Main Applications |
|---|
Industrial use |
| Key Features |
|---|
Ductility, thermal stability, impact resistance |
Copyright© 2025 PlaBase. All Rights Reserved.