Public Beta
Public Beta
| Manufacturer | Solvay Specialty Polymers Japan Co., Ltd. |
| Resin Name | PES |
| Product Name | Veradel |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO1183 | Density (23℃) | ISO1183 | g/cm^3 | 1.37 | - |
Proportion | ASTMD792 | 1.37 | - | ||
Water absorption Water absorption/ASTMD570 | Water absorption rate (24hr) | ASTMD570 | % | 0.54 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Vicat softening temperature Vicat softening temperature/ISO306 | Vicat softening temperature | ISO306 | ℃ | 217 | - |
Deflection Temperature under Load Deflection Temperature under Load/ISO75-2/A | Deflection temperature under load (1.8MPa, annealed, 4.00mm) | ISO75-2/A | ℃ | 213 | - |
Deflection temperature under load (1.8MPa, no annealing treatment) | ASTMD648 | ℃ | 204 | - | |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ASTMD696 | Linear expansion coefficient (flow) | ASTMD696 | ×10＾-5/℃ | 4.9 | - |
Flammability Flammability/UL94 | Flammability | UL94 | NaN | 0.75mm |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO527 | Tensile yield stress (23℃, 4.00mm) | ISO527 | MPa | 88 | - |
Tensile Modulus Tensile Modulus/ISO527-2 | Tensile modulus (23℃, 4.00mm) | ISO527-2 | MPa | 2800 | - |
Tensile Modulus | ASTMD638 | MPa | 2650 | - | |
Bending strength Bending strength/ISO178 | Bending strength | ISO178 | MPa | 111 | - |
Bending strength | ASTMD790 | MPa | 111 | - | |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus | ISO178 | MPa | 2750 | - |
Flexural modulus | ASTMD790 | MPa | 2900 | - | |
Charpy impact strength Charpy impact strength/ISO179/1eU | Charpy impact strength (unnotched) | ISO179/1eU | No Break | ||
Charpy impact strength (notched) | ISO179/1eA | kJ/m^2 | 7.7 | - | |
Izod impact strength Izod impact strength/ISO180 | Izod impact strength (unnotched) | ISO180 | No Break | ||
Izod impact strength (notched) | ISO180/A | kJ/m^2 | 6.4 | - | |
Izod impact strength (notched) | ASTMD256 | J/m | 85 | - | |
Tensile stress Tensile stress/ASTMD638 | Tensile stress | ASTMD638 | MPa | 82.7 | - |
Tensile Yield Elongation Tensile Yield Elongation/ISO527 | Tensile Yield Elongation | ISO527 | % | 6.7 | - |
Tensile Yield Elongation | ASTMD638 | % | 6.5 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/ASTMD257 | Volume resistivity | ASTMD257 | Ω・cm | NaN | - |
Dielectric constant Dielectric constant/ASTMD150 | Dielectric constant (60Hz) | ASTMD150 | 3.51 | - | |
Dielectric constant (1kHz) | ASTMD150 | 3.5 | - | ||
Dielectric constant (1MHz) | ASTMD150 | 3.54 | - | ||
Dielectric loss tangent Dielectric loss tangent/ASTMD150 | Dielectric tangent (60Hz) | ASTMD150 | ×10^-3 | 1.7 | - |
Dielectric tangent (1kHz) | ASTMD150 | ×10^-3 | 2.2 | - | |
Dielectric tangent (1MHz) | ASTMD150 | ×10^-3 | 5.6 | - | |
Dielectric Strength Dielectric Strength/ASTMD149 | Dielectric Strength | ASTMD149 | kV/mm | 15 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/ASTMD955 | Mold shrinkage rate MD | ASTMD955 | % | 0.6 | - |
MFR MFR/ISO1133 | MFR(380℃,2.16kg) | ISO1133 | g/10min | 30 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying conditions (injection) | ℃ | 177 | 2.5hr |
| Color |
|---|
Coloring |
| Main Applications |
|---|
Automobiles, Automotive exterior parts, Metal replacements, Reflectors |
| Key Features |
|---|
PESU, creep resistance, dimensional stability, good appearance, thermal stability, toughness, high flow, high heat resistance, low moisture absorption |
Copyright© 2025 PlaBase. All Rights Reserved.