Public Beta
Public Beta
| Manufacturer | Solvay Specialty Polymers Japan Co., Ltd. |
| Resin Name | PEEK |
| Product Name | KetaSpire |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO1183 | Density | ISO1183 | g/cm＾3 | 1.46 | - |
Water absorption Water absorption/ISO15512 | Water absorption rate (24hr) | ISO15512 | % | 0.022 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Melting point Melting point/ISO11357 | Melting point (DSC First heat) | ISO11357 | ℃ | 345 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile breaking stress Tensile breaking stress/ISO527-2 | Tensile breaking stress | ISO527-2 | MPa | 162 | - |
Tensile breaking stress | ASTMD638 | MPa | 152 | - | |
Tensile strain at break Tensile strain at break/ISO527-2/1A/5 | Tensile elongation at break | ISO527-2/1A/5 | % | 3.5 | - |
Tensile elongation at break | ASTMD638 | % | 3.7 | - | |
Tensile Modulus Tensile Modulus/ISO527-2 | Tensile Modulus | ISO527-2 | MPa | 8300 | - |
Tensile Modulus | ASTMD638 | MPa | 8200 | - | |
Bending strength Bending strength/ISO178 | Bending strength | ISO178 | MPa | 238 | - |
Bending strength | ASTMD790 | MPa | 254 | - | |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus | ISO178 | MPa | 7720 | - |
Flexural modulus | ASTMD790 | MPa | 7860 | - | |
Charpy impact strength Charpy impact strength/ISO179 | Charpy impact strength | ISO179 | kJ/m＾2 | 60 | - |
Izod impact strength Izod impact strength/ISO180 | Izod impact strength (notched) | ISO180 | kJ/m＾2 | 6 | - |
Izod impact strength (unnotched) | ASTMD256 | J/m | 770 | - | |
Izod impact strength (notched) | ASTMD256 | J/m | 60 | - | |
Surface hardness Surface hardness/ASTMD785 | Rockwell hardness (M scale) | ASTMD785 | M | 103 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Volume resistivity Volume resistivity/ASTMD257 | Volume resistivity | ASTMD257 | Ω・cm | NaN | - |
Surface resistance Surface resistance/ASTMD257 | Surface resistance | ASTMD257 | Ω | NaN | - |
Dielectric constant Dielectric constant/ASTMD150 | Dielectric constant (60Hz) | ASTMD150 | 3.34 | - | |
Dielectric constant (1kHz) | ASTMD150 | 3.35 | - | ||
Dielectric constant (1MHz) | ASTMD150 | 3.35 | - | ||
Dielectric loss tangent Dielectric loss tangent/ASTMD150 | Dielectric tangent (60Hz) | ASTMD150 | 0.002 | - | |
Dielectric tangent (1kHz) | ASTMD150 | 0.001 | - | ||
Dielectric tangent (1MHz) | ASTMD150 | 0.004 | - | ||
Dielectric Strength Dielectric Strength/ASTMD149 | Dielectric Strength | ASTMD149 | kV/mm | 310 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
MFR MFR/ASTMD1238 | MFR(400℃,2.16㎏） | ASTMD1238 | g/10min | 18 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying conditions | ℃ | 150 | 4.0hr |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler content (GF) | % | 20 | - |
| Color |
|---|
Light brown |
| Main Applications |
|---|
Aircraft,Automotive,Connectors,Dental Applications,Electrical/Electronic,Film,Hospital Supplies,Industrial Applications,Medical Equipment,Healthcare,Oil/Gas,Pump Parts,Seals,Surgical Instruments |
| Key Features |
|---|
Autoclave sterilization, biocompatibility, chemical resistance, electron beam sterilization, ethylene oxide sterilization, fatigue resistance, flame retardant, dimensional stability, sterilization, heat sterilizable, high flow, high heat resistance, high rigidity, high strength, radiation resistance, radiation sterilizable, radiation transmissive, steam resistance, steam sterilization |
Copyright© 2025 PlaBase. All Rights Reserved.