Public Beta
Public Beta
| Manufacturer | Solvay Specialty Polymers Japan Co., Ltd. |
| Resin Name | HPPA |
| Product Name | Kalix |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ASTMD792 | Proportion | ASTMD792 | 1.6 | - | |
Water absorption Water absorption/ASTMD570 | Water absorption rate (23℃, 24hr) | ASTMD570 | % | 0.39 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO75-2/A | Deflection temperature under load (1.8MPa, no annealing treatment) | ISO75-2/A | ℃ | 248 | - |
Melting point Melting point/ASTMD3418 | Melting point | ASTMD3418 | ℃ | 260 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO527-2 | Tensile Yield Stress | ISO527-2 | MPa | 290 | - |
Tensile strain at break Tensile strain at break/ISO527-2 | Tensile strain at break | ISO527-2 | % | 2.7 | - |
Tensile Modulus Tensile Modulus/ISO527-2 | Tensile Modulus | ISO527-2 | MPa | 20000 | - |
Bending strength Bending strength/ISO178 | Bending strain stress (3.5%) | ISO178 | MPa | 425 | - |
Flexural modulus Flexural modulus/ISO178 | Flexural modulus | ISO178 | MPa | 19000 | - |
Izod impact strength Izod impact strength/ISO180 | Izod impact strength (unnotched) | ISO180 | kJ/m＾2 | 95 | - |
Izod impact strength (notched) | ISO180/1A | kJ/m＾2 | 18 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Dielectric constant Dielectric constant/ASTMD2520 | Dielectric constant (2.40GHz) | ASTMD2520 | 3.86 | - | |
Dielectric loss tangent Dielectric loss tangent/ASTMD2520 | Dielectric loss tangent (2.40GHz) | ASTMD2520 | 0.011 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage rate MD Mold shrinkage rate MD/Internal Method | Mold shrinkage rate MD | Internal Method | % | 0.15 | - |
Mold shrinkage rate TD Mold shrinkage rate TD/Internal Method | Mold shrinkage rate TD | Internal Method | % | 0.6 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Resin temperature | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Drying conditions | ℃ | 80 | 4.0-12hr |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler content (GF) | % | 50 | - |
| Color |
|---|
Black, colored |
| Main Applications |
|---|
Mobile Phones, Electrical Components, Electrical/Electronics, Thin-walled Components |
| Key Features |
|---|
High speed molding cycle, good dimensional stability, impact resistance, good appearance, high flow, high rigidity, high strength, hot water moldability, paintable, platable |
Copyright© 2025 PlaBase. All Rights Reserved.