Public Beta
Public Beta
| Manufacturer | Daicel Miraize Co., Ltd. |
| Resin Name | ABS |
| Product Name | Cevian V |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm^3 | 1.07 | - |
Water absorption Water absorption/ISO 62 | Water absorption | ISO 62 | % | 0.3 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75 | Deflection temperature under load (1.80MPa) | ISO 75 | ℃ | 101 | - |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ISO 11359 | Linear expansion coefficient (flow) | ISO 11359 | x10^-5/℃ | 8 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Bending strength Bending strength/ISO 178 | Bending strength | ISO 178 | MPa | 69 | - |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus | ISO 178 | MPa | 2300 | - |
Charpy impact strength Charpy impact strength/ISO 179/1eA | Charpy impact strength (notched, 23℃) | ISO 179/1eA | kJ/m^2 | 10 | - |
Izod impact strength Izod impact strength/ASTM D256 | Izod impact strength (notched, 23℃/6.4mm) | ASTM D256 | J/m | 100 | - |
Tensile strength Tensile strength/ISO 527 | Tensile strength | ISO 527 | MPa | 43 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage Mold shrinkage/Daicel Process | Mold shrinkage | Daicel Process | % | - | |
ＭＦＲ ＭＦＲ/ISO 1133 | Melt mass flow rate (220℃/10kg) | ISO 1133 | g/10min | 4 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Cylinder Temperature Setting | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Pre-drying | ℃ | 3-5h |
| Key Features |
|---|
Heat Resistant |
Copyright© 2025 PlaBase. All Rights Reserved.