Public Beta
Public Beta
| Manufacturer | Daicel Miraize Co., Ltd. |
| Resin Name | PBT/ABS |
| Product Name | Novalloy B |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm^3 | 1.44 | - |
Water absorption Water absorption/ISO 62 | Water absorption | ISO 62 | % | 0.15 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO 75 | Deflection temperature under load (1.80MPa) | ISO 75 | ℃ | 190 | - |
Deflection temperature under load (0.45MPa) | ISO 75 | ℃ | 210 | - | |
Deflection temperature under load (1.82MPa/6.4mm) | ASTM D648 | ℃ | 200 | - | |
Deflection temperature under load (0.46MPa/6.4mm) | ASTM D648 | ℃ | 210 | - | |
Linear expansion coefficient (flow) Linear expansion coefficient (flow)/ISO 11359 | Linear expansion coefficient (flow) | ISO 11359 | x10^-5/℃ | 2 | - |
Linear expansion coefficient (right angle) Linear expansion coefficient (right angle)/ISO 11359 | Linear expansion coefficient (right angle) | ISO 11359 | x10^-5/℃ | 10 | - |
Flammability Flammability/UL 94 | Flammability | UL 94 | NaN | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Bending strength Bending strength/ISO 178 | Bending strength | ISO 178 | MPa | 170 | - |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus | ISO 178 | MPa | 8900 | - |
Charpy impact strength Charpy impact strength/ISO 179/1eA | Charpy impact strength (notched, 23℃) | ISO 179/1eA | kJ/m^2 | 8 | - |
Izod impact strength Izod impact strength/ASTM D256 | Izod impact strength (notched, 23℃/6.4mm) | ASTM D256 | J/m | 80 | - |
Tensile strength Tensile strength/ISO 527 | Tensile strength | ISO 527 | MPa | 115 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Dielectric Strength Dielectric Strength/ASTM D149 | Dielectric breakdown strength (1.5mm) | ASTM D149 | kV/mm | 35 | - |
Tracking resistance Tracking resistance/IEC 112 | IEC tracking (3.0mm) | IEC 112 | V | 500 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage Mold shrinkage/Daicel Process | Mold shrinkage | Daicel Process | % | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Resin temperature Resin temperature/ | Cylinder Temperature Setting | ℃ | - | ||
Mold Temperature Mold Temperature/ | Mold Temperature | ℃ | - | ||
Drying conditions Drying conditions/ | Pre-drying | ℃ | 3-5h |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Filler Content Filler Content/ | Filler Content | % | 30 | GF |
| Key Features |
|---|
Filler reinforced, heat resistant |
Copyright© 2025 PlaBase. All Rights Reserved.