Public Beta
Public Beta
| Manufacturer | Asahi Kasei Corporation |
| Resin Name | POM |
| Product Name | Tenac |
| ISO Material Code | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Density Density/ISO 1183 | Density | ISO 1183 | g/cm3 | 1.41 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Deflection Temperature under Load Deflection Temperature under Load/ISO75 | Deflection temperature under load (load 1.82 MPa) | ISO75 | ℃ | 100 | - |
Linear expansion coefficient Linear expansion coefficient/ISO 11359 | Linear expansion coefficient | ISO 11359 | ×10^-5/℃ | 10 | - |
Flammability Flammability/UL94 | Flammability | UL94 | NaN | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Tensile Yield Stress Tensile Yield Stress/ISO527 | Tensile Yield Stress | ISO527 | MPa | 65 | - |
Tensile strain at break Tensile strain at break/ISO527 | Tensile strain at break | ISO527 | % | 20 | - |
Tensile Modulus Tensile Modulus/ISO527 | Tensile Modulus | ISO527 | MPa | 2800 | - |
Flexural modulus Flexural modulus/ISO 178 | Flexural modulus | ISO 178 | MPa | 2700 | - |
Charpy impact strength Charpy impact strength/ISO179 | Charpy impact strength (notched) | ISO179 | KJ/m^2 | 3.5 | - |
Blurred items can be viewed by registering or logging in.
Blurred items can be viewed by registering or logging in.
| Property | Details | Inspection Methods | Unit | Value | Note |
|---|---|---|---|---|---|
Mold shrinkage Mold shrinkage/Asahi Kasei Process | Mold shrinkage (flow direction/transverse direction) | Asahi Kasei Process | % | - | |
ＭＦＲ ＭＦＲ/ISO1133 | Melt Mass Flow Rate | ISO1133 | g/10min | 70 | - |
| Key Features |
|---|
Copolymer, Standard, High Flow |
Copyright© 2025 PlaBase. All Rights Reserved.